A few questions about DAC basics


I have been making a few upgrades to my system and a friend suggested that I consider a decent used DAC as a good upgrade. He was not really sure if my CD/DVD player could use a DAC. He has very high end equipment and has separate transport/DAC etc. Guess he hasn't slummed it with off the shelf integrateds for awhile:)

Here is my system:

My system is:
Denon 5 ch DTS receiver (1801)
Parasound 1000 hca amp for the fronts only
RBH Sound 61SE fronts
RBH 661SE Center
Polk Audio S6’s for rears
ACI Titan Sub
Pioneer Elite DVD/CD player DV-C36
DH Labs T14 silversonic speaker wire
Tekline TL 2000 RCA interconnect from the Denon L/R preouts to the Parasound amp
Glass Toslink digital cable from Pioneer to Denon

My first question is can I add a DAC to this system?
I am assuming that the Pioneer d/a converter is what I am using now when I play CD's.
I have coax, optical and regular RCA outputs on the Pioneer.
Presently using a Glass Toslink to the optical in on the Denon. The Denon has two optical ins, a digital coax in, and several RCA analog pairs in, as well as additional Ext. in for 6.1.

My second question is more like several and I apologize if it is too simplistic. From reading these forums it seems that an external DAC is connected from a digital output from a CD or DVD player and then has outputs that go into the preamp, or in my case the Denon DTS receiver. Does the DAC connect to the preamp via analog in or digital in to the receiver?

I am also assuming that the DAC handles the digital signal in such a way as to improve or expand it? I read stuff about upsampling, etc and it sounds very interesting.

Another question I have is what happens when I am playing a DVD? This is where I start to get confused.When I am playing a DVD right now, the Pioneer sends the DTS or Dolby Digital signal to the Denon for processing into 5.1.
Does adding a DAC still allow this process? I mostly listen to music, but still want to watch movies in 5.1 dts or DD sometimes.

Finally, is this a reasonable upgrade for this modest of a system, and do you have any suggestions for around 3-500$ used?

Thanks for your input and patience. I have improved my system quite a bit from the info on these forums and appreciate the expertise here.
lkdog
Thanks guys. I am learning a lot.
I may give Denon a call to confirm the info in the manual.

Mrowlands- I left out what it said about the sub jack in the EXT IN group of RCA in jacks. It has a SUB IN and this signal is routed to the regular RCA pre out that I have my sub in now. I guess I would put the sub conncetor into the EXT IN Sub In jack and it would route it correctly when listening to two channel.

One more dumb question. It has dawned on me from the discussion here that my signal out of the Pioneer Elite DVD/CD D/A is then being reprocessed by the surround circuitry. AM I correct in assuming that I could route the RCA outs from the Pioneer Elite ot the EXT IN jacks and bypass the Denon surround stuff? I could leave the toslink in place for when I wanted to do HT.
My guess is that the Pioneer DCA is better than what is in my Denon. Here is what the Pioner manaul states about the transport and the DAC:

CD Mode for Full CD Changer Functions & Video Off
High Speed Loading and Resume
10-bit Video Signal DAC 96KHz/24-bit Audio DAC
Hi-Bit Legato Link Conversion
Dual User Memories
Twin-Wave Laser Pickup for CD / Video CD / CD-R playback
Viterbi Error Correction for Superior Reading Accuracy

Other than pushing a button and maybe having to switch the sub cable this might be better two channle than now even without a DAC.

I think am going to try autditon a DAC if the EXT IN thing will work. I will call Denon.

Thanks to all.
It's a good idea to try the analog outs from the Pioneer. Regarding the subwoofer, an external DAC like the P3A will not have a subwoofer out, so I'm not sure what you're saying there. You will only be using the FL and FR inputs on the Denon. So the only way to get a signal to the sub is to route the full range left and right channels to the sub, either before the power amp or after it depending on the sub, and use its built in crossover. That's why you'd need a sub with 2 sets of inputs. Either that, or if you want to boogie with some really low bass, you can always switch back to the digital input on the Denon. But I have a feeling that your system will have a much better soundstage without the processing, so try the Pioneer's analog outputs to see what you think.
Mrowland -

Hmmmm..... You are right, if I use a DAC (or even just the Pioneer DVD/CD analogs) into the EXT IN FL and FR inputs I am missing a signal to the sub.

I wonder if an RCA Y splitter was used to the SUB IN from one of the FR or FL channels to the SUB IN in the EXT IN group if that would work?
This is how the EXT IN RCA group looks:

O O O
FL C FR

O O O
SL Sub SR

The Denon manual seems to imply that the SUB IN jack in the EXT IN group is routed internally to the regular RCA Sub preout jack which is what I am using for the sub now. If I used a splitter the full signal would then be sent to the Sub and it's built in crossover could be used.
The sub itself (ACI Titan) has three line level inputs (L/C/R), but I am guessing that is not what you mean by "That's why you'd need a sub with 2 sets of inputs".
I can get a speaker level input adapter for the sub from ACI, but have never used that before.

How do people using a DAC get a sub signal to their sub?
Is this why Mraybeck has suggested a real stereo preamp above?

Lkdog,
I do feel that getting a dedicated 2-channel preamp will be a significant upgrade in your system. However, even with a preamp, you will still need either a speaker-level input on your ACI (like the RELs), or use line-level input from a splitter (probably will degrade 2-channel sound) or route the entire line-level signal to the sub to use its crossover, and then from the line out of the sub to the amp. This last method also has its drawbacks as you will be running your entire audio signal through another 6+ feet of cabling. This is why speaker-level input is generally preferred for 2-channel audio.
If you are currently using the RCA sub preout for music listening, then I would be willing to bet that your Denon is, in fact, redigitizing your analog signal. The LFE circuitry is done in the digital domain, and I truly doubt that your receiver has a good analog crossover. If you really want to maximize your system for 2-channel and wish to keep the sub, I would get the speaker-level input adapters from ACI. Just my .02
Lkdog,

Nice idea, but there's another problem in addition to the degradation mentioned by Mraybeck. When using the EXT inputs, you'll be running a full range signal to the front speakers, so the crossover setting in the sub that works well this way will not work if you have the Denon set for "small" front speakers! However, as I've said before, my low end Onkyo sigificantly degrades the sound when ANY processing is used (this includes using the crossover via setting the speakers to "small"), so I just leave them full range. The drawback here is that you're wasting power and possibly muddying up the midrange by trying to pump the low frequencies into the small speakers, but life is full of compromises.

By the way, trust me that it won't work very well splitting only one of the channels into the Denon's subwoofer input, because music mixes are too varied (yes, I tried it once). Also, I don't like the idea of combining the left and right because I don't think the output buffer of the DAC would be happy with that.

Many people have had this same problem, so you might do searches here and at the AudioAsylum.com. Many people have tried a separate preamp as per Mraybeck, but it can be a hassle to match the volume of all channels, especially at different volumes.

There are 3 main ways to achieve the use of a sub in your situation.

1) Get a separate 2 channel system. Don't laugh, it's been done by others than your's truly.

2) Get 2 subs. One is hooked up to the LFE channel (you can use the HT receiver's built-in crossovers on everything but the direct pass throughs); the other is hooked up to the preamp outputs (low level) or the amplifier outputs (high level), and its crossover is set to blend with your front speakers running full range.

3) Get 1 sub that has regular left and right channel inputs (low level and or high level) AND an LFE input. As I said earlier, the REL Storm III (and higher models) is the only one that I know of that does this. The crossover must be defeatable on the LFE input if you are using the HT receiver's built-in crossovers, because you will have to set it around 40 Hz for your fronts, but the receiver will probably cross over the fronts at about 80 to 120 Hz.

Just a note. All of this is moot if the HT receiver is able to pull off the low frequencies on the analog pass-throughs. I don't know of any that do this though.

Whew!

Let us know what happens.