Which SPEAKER for the 21ST century?

Twl i know very little on the tech side of speakers..you may however want to e-mail someone your questions about the potential of the manger..i've heard the driver only works in a woofer set up..i have a choice of 2 FOCAL woofers with the manger..

i need more time to evaluate the MANGER...ran into a few opponents>>>i'll post ASAP.. tweek out

Speakers were developed in the 20th century. All the technologies. Looking ahead more than a few months to the next greatest (and most expensive) speaker kind of minimizes how long a century is and how much development can happen in such a time period.

Having said all that my guess is that 'speakers' by the end of this century will be one long device that you hang around a space - the main consumer requirement being ease of use (followed, hopefully, by sound quality). The source equipment will detect the format (length and shape) of the speaker and present a full surround sound picture of the music. The presented sound can be dynamically tested by the source equipment and equalized as necessary. From this you'll detect that I believe 'stereo' is old (almost as old as mono) as is 5.1, 7.1, 10.2, 17.6 or whatever. We'll have true surround and the media will present a picture of the soundstage rather than discrete sound channels.

Main problem I can see with this is how a user-friendly flexible long panel will be able to push enough air to create low frequencies, and be mounted stiffly enough to present a static presentation of sound. But that's not my problem - over to the engineers. I've got to start saving for all this new technology. And I don't even have SACD or DVD-A yet.

the folks that are following this thread are the lucky folks..i found them!! ..yep..the drivers that i consider to be 21st century drivers are SKAANING SCANSPEAK SEAS FOCAL VINASTON EXPOLINEAR(ribbons) ESg(ribbons) RAVEN (ribbons) PHILIPS (ribbons),,these are the drivers you want in your cabinets..most of these are not cheap..but then how much do you pay for speakers at your local "hifi" shop???..you see what you are actually paying for in essence are the ads of the labs and the nice markup at your friendly local shop..i want to pay for quality drivers and quality xovers..now if you log onto http://www.kochaudio.de/ you'll find some of these drivers..check out my favorites the PHILIPS RT series of ribbons..look at the RSQSP/11 (like $800each!!)as well take a look at possibly the best sounding speaker for large rooms the VINASTON 890MK11..as for their drivers i like the DR45N tweet AL130/A AL170/A MHT12 G25HETL16H TL300..here's my pick..2 way..lets go with the SKAANING 10 incher + PHILIPS RSQSP/11..and for 3 way ..hummm..tough choice..lets again go SKAAN 10 + VINASTON DR45N + ESg3..for xovers lets go with the MARCHAND XM126..now that's a 21st century speaker

I throw everyone a curveball, or nearly everyone.... I vote that the speaker for the 21st century will be the successful development of the hypersonic speaker. Prototypes exist and work, but not to the performance needed. When the science figures it out, it should theoretically be the best speakers available.... It is based on the physics that when 2 musical frequencies are played, each tone is played, as well as the sum and difference of the two tones. Therefore, if we have 1 speaker playing at say 100,000 Hz, we'll never hear it. If we have a second playing at 100,002-120,000Hz Range, the additive sound is also silent to the human ear, but the difference should give one a 2-20,000Hz range.

The difficulty w/ most drivers is that they need to play from 20-20,000Hz, or a span of 100,000% of minimum frequency. Entirely too much to handle w/ 1 driver. If we now make a driver that plays from 100,002-120,000Hz, we only need to make a driver capable of 20% over minimum frequency... The should be MUCH easier to therefore accomplish the entire audible frequency range w/ 1 pair of drivers....

Cheers all.