Thiel - Inventors and Tinkerers All

The 3.6's are tizzy but will reveal tizzy if you put it in!

OOPS, I mean not tizzy - Thiels have a bad rap for being bright, tizzy, etc... It simply requires careful system matching to optimize a great design.

Kinsekd, you must have visited Thiel shortly before me. We were not lucky enough to get a listening session, but I wholeheartedly agree with you about the hospitable atmosphere and all the friendly folks who took time out of their day to explain things to us (well, I can't really say this one way or the other about the man in charge - JT did pop through a couple of times during the tour to speak with Shari, but I was a little disappointed we didn't get to chat briefly or even greet him, but then he's probably quite busy).

Anyway, about the commonplace 'brightness' charge historically leveled at Thiel speakers, I have always maintained that - at least for their products of the 90's and beyond that I own or have heard - most of that can safely be chalked up to set-up issues, such as listening at a closer distance than they were designed for, or using partnering gear not up to the task. Part of this is just the inevitable result of their flat, extended response and great resolution revealing what is really going on with disks and gear, and possibly also their inherently wide dispersion highlighting sidewall reflections to a greater degree than some speakers having less extended power response curves. But part of it has also been the demanding nature of certain of their models' impedance curves, which can place even quite decent amps and cables at somewhat of a disadvantage. Regarding that last point, Shari conceded that Jim Thiel has generally been coming around lately to placing more emphasis on kinder, gentler speaker loads, which should be good news for all prospective Thiel owners.

In fact, she suggested that in computer modeling for the upcoming 3.7, JT had been strongly considering giving up a couple of Hz worth of low-end extension in favor of making a higher-sensitivity, easier-to-drive design overall, a smart design trade-off in the real world if you ask me, especially in this age of subwoofers and integrated or tubed amplifiers. When I asked her if this new attention to reasonable speaker loads may have been primarily inspired by the HT world, where one multi-channel amp may be called upon to satisfactorily drive multiple speakers for both movies and music, she said that potential benefit had actually never occurred to her, though she wouldn't rule it out as a theoretical consideration - certainly Thiel has been successfully addressing that market. Whatever the reason, that Thiel has been using tubed amps (including the model I use) in their auditioning set-ups is also an encouraging thing to know. Shari agreed that a little ameliorating of the toughness of some of their speakers' electrical curves could help go a long way toward doing the same thing for their mostly undeserved reputation for inherent brightness as a brand.

IMHO, Thiel would be better off trying to keep the impdeance load at or above 4 Ohms, maintain the current sensitivity,and maintaining or better yet lowering the bass response. I would also suggest placing the drivers closer together. This might allow for easier driver intergration and ergo, closer speaker to listener placement. While the smaller speakers allow for appropriate bass reductions in smaller rooms, they don't take into consideration the logistics of placement. As it stands now, Thiels smaller speakers require nearly the same distance from surrounding walls and listener as their larger ones. While allowing for closer surrounding wall proximity, might compromise imaging, it might also economicaly improve bass response. Improved bass response might shed the reputation Thiel has for "brightness" (an opinion, I don't subscribe to). I know its hard to bend the rules of physics, but, if anybody can, Jim Thiel can. I would love to see the return of sealed boxes. Perhaps a fresh (digital?) approach to the brain child that was the 3.5. All the recent research that went into the new subwoofer should help to keep development costs down. Heck, they could just slap a powerpoint on top of the subwoofer. Maybe, just for giggles, they could slap two of them on top, back to back, and play with a dipole?

Unsound: Thiels, at least as I have gotten the impression, have long been thought to have excellent bass no matter any other perceived shortcomings, and I concur with this view. I don't personally believe that the line's bass response is at all connected with the charge of 'brightness' that has been leveled at them over the years, and don't think generally that a speaker's true low-end performance has much bearing on the perception of mid- and upper-range listenability.

As far as driver spacing goes, it seems to me that Thiel speakers' time-aligned construction dictates the driver spacing based on the angle of the baffle slope-back. If the baffles were angled back more steeply, the drivers could be more closely grouped, but would also aim upward more severely, requiring even lower placement overall with respect to the listener's seated ear height (Thiels already feature slightly lower-placed upper-frequency drivers than many other brands, presumably due to this angled-baffle factor). A more steeply-raked baffle would also require a deeper-dimensioned cabinet to enclose the same volume, though Thiels as designed are not especially deep-cabineted speakers by today's standards.

Regarding in-room placement, great soundstaging and imaging are always harmed by close wall proximity, including the front wall. I have found my Thiels to be balanced, bass-wise, for optimal placement of at least a couple of feet out into the room - much closer and they're too bassy, which is as it should be. For really big rooms, you'd have to go with one of the bigger models. I don't think any speaker can sound its best in a really small room, and don't think a near-full-range floorstander ought to be designed to try.

I'm not as down as you about the bass-reflex vs. sealed-box evolution of the line, considering the trade-offs of greater driver mass (less speed and controlability), and of system cost, complexity, and possibly lowered ultimate transparency involved in employing the latter in combination with outboard active EQ. But you would get no argument from me if JT started turning out designs that didn't fall below 4 ohms at any frequency - or even if he introduced an 8 ohm design, heaven forfend.

To me, the next step in the advancement of the line should logically come in the cabinet arena: away from single-baffle, square-backed, parallel-sided, MDF-built cabinets, and toward something more radical and high-tech (and unfortunately more expensive, along with less furniture-looking) in the way of materials and shapes. (However, their spotty history of flirtations with exotic molded-baffle variants, and their clear orientation as a wooden-cabinet manufacturer offering a moderately-priced product for the quality, both argue against any sudden leaps foward on this front.) Thiel's drivers, crossovers, and basic design concept are all near as good as they could be while eschewing large multiple-driver arrays; it's only their cabinets that hold them back a bit in the no-holds barred sweepstakes, even for all their strengths (such as the rounded baffle edges, acoustically-designed grilles, and relative ease of room integration) at the present price points. This is the area in which I would like to see what JT can do taking a page from the Wilsons, B&Ws, and Kharmas of this world as his inspiration, but of course those companies are either much larger or much costlier than Thiel.