How many amps should I buy for my speakers?


I want to upgrade my receiver to possibly separates or a good HT receiver. My question is what is the amp range I should be looking for? I've got a living room 17x21 with 18' cathedral ceilings.

My main speakers are rated for 150watts (Cerwin-Vega Re-25). My surrounds are 120watts (B&W 805's), and my center is 250watts (B&W HTM1). The mains will most likely be replaced someday when space allows to B&W towers (804 or 803) but I've got no plans for this in the near future.

How much power should I be using for my nearly 100% movie watching?
norma_s
I have to agree with Prpixel, I ran Matrix 802's (series I, which actually are like the 803’s) and had an Aragon 4004 Mk II (200wpc) and if anything, I think they would have opened up more with some more power.

As far as a 100 watt receiver..... I really would think you'd do much better with amps, and with bigger amps given the speakers you are heading to. Yes, for now the CW's will sound OK with minimal power, as they are pretty efficient, but if you stay with low power...once you do upgrade the fronts (which I would highly recommend you do for synergy alone) you will be in the amp market again!

Learn from those of us who have gone through many (15+) systems to get where we (I) are (am), buy what you'll need, assuming you can afford it, or consider waiting until you can! It's usually cheaper than doing it all several times....sometimes not as much fun/frustration, but certainly cheaper!

As for your main question, I have a similar sized room, with 12-15' ceilings. I use 7 (seven) 200 wpc dual mono amps for my 5 speakers..... overkill? Maybe! But it sounds great, and doesn't give out at higher volumes...which I find HT's to really need! I think if you ran B&W's off even the best receiver, you'd find they'd still do better with good power amps. I personally find the B&W’s a little rough in the upper mids and highs, so I would recommend a smooth amp. McCormack’s always seemed like a good match, but when I tried them (DNA 1) I found the bass less than satisfying after the Aragon.

Good luck and happy listening!

Ken
Ken,
I liked your explanations. Very well explained.

I read somewhere that you should match your amps to your speaker wattage. So, if I went with 200 wpc, it would be OK with the lower wattage B&W 805 (120w)? I won't have to worry about damaging them when I watch a movie with a great soundtrack?
You are more likely to damage you speakers with less power than more. Clarity is a big issue!
I must agree w Prpixel, having owned various Nautilus speakers. They really open up when you pour on the juice.
Besides the fact, you are more likely to damage your speakers by not having enough power and clipping the amp.

Happy Listening,

Damon
Norma

I was just kidding, I,ve never known anyone that had Cerwin-Vega's for fronts and stuck B&W 805's in the rear..you may be a first!

Your future plan is very solid..I agree with everyone else on the more power is better than less power.

Dave