I'm not aware of any open back line array plans. I had tried to build a pair using ten Parts Express 4.5" Vifa "buyout" woofers with a single tweeter and they sounded terrible, but that's probably a product of my design incompetence rather than a generic problem with open back arrays. If you're interested in arrays you should read Jim Griffin's white paper on that topic at http://www.audiodiycentral.com/resource/pdf/nflawp.pdf
After building three nearfield line arrays I'm convinced they are superior to point source speakers in several regards that are discussed in Dr Griffin's paper, but there are two offsetting disadvantages: 1) If you use quality drivers they are expensive, and 2) The enclosures are a much bigger project than smaller two or three way speakers. The driver quality thing is obvious - sixteen $100 woofers and 16 $118 ribbon tweeters are more expensive than two of each:) The enclosure construction issue becomes obvious when you have to lift a 4X8 sheet of 1" mdf on to the table saw roller tables and guide it accurately throught the saw. But when you have finished the project and listen to the completed speakers you will know it's worth the extra effort and expense.
Regarding the cost, I divide line arrays into three categories: 1) The obscenely expensive mainstream products like the Pipedreams and the Epiphanies. 2) The non-mainstream high end products offered by Selah Audio and GR Research, and 3) The DIY projects that use budget drivers.
If you have the money definitely choose alternative #2. I have heard Rick and Danny's arrays. They sound really good and even as completed ready-to-play speakers sell for less than half the price of the mainstream products. If you don't have $2,500 or more for a DIY enclosure kit, you are limited to alternative 3.
I'm aware of several budget DIY line array projects. Probably the best is the Linus I, which is no longer offered, but Jim Griffin will email you a copy of the plans for the asking. The Linus I uses twelve 5" MCM aluminum cone woofers (the shielded version of the driver that was used in the Bottlehead Straight 8) and six Silver Flute planar tweeters per side. The parts for this project will cost about $600, most of it for the twelve tweeters.
To get below the $600 cost you need to use a single tweeter instead of a planar array. I did this with the Fredarrays. It's not the best choice, but the single tweeter mated with the woofer array better than you would expect. Several people who heard the FredArrays at the Great Plains Audio Fest were impressed, one so much that he later bought them from me. I plan to build another pair soon. This time I will use the same Silver Flute woofers which, at $12.50 each by the case, are an incredible bargain and sound better than the $25 Vifa TC-series woofers they compete with. I want this one to be more SET friendly and plan to use eight per side to get a 16 ohm impedance. I also plan to use a better quality tweeter than the $12 MCM titanium dome in the original FredArray. possibly an Eminence compression horn.
The next step down the ladder would be to with for Parts Express to come up with another Vifa 4.5" buyout offer. These ususall go for $5-7 and sould pretty good. There's a good example of an array using these at
http://www.lonesaguaro.com/speakers/array/array.htm
The next step down from there would be an array using dirt cheap parts like these 79 cent Parts Express "factory buyout" tweeters at http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=279-010
I have some doubts about this extreme budget level. These tweeters have to sound terrible, like the tweeters in that Honda with a fart box subwoofer and cheap tweeters that pulls up next to you at the light with the windows open and rap music going full blast, and an array of 20 will sound like 20 spittng tweeters instead of one. Just my two cents.
After building three nearfield line arrays I'm convinced they are superior to point source speakers in several regards that are discussed in Dr Griffin's paper, but there are two offsetting disadvantages: 1) If you use quality drivers they are expensive, and 2) The enclosures are a much bigger project than smaller two or three way speakers. The driver quality thing is obvious - sixteen $100 woofers and 16 $118 ribbon tweeters are more expensive than two of each:) The enclosure construction issue becomes obvious when you have to lift a 4X8 sheet of 1" mdf on to the table saw roller tables and guide it accurately throught the saw. But when you have finished the project and listen to the completed speakers you will know it's worth the extra effort and expense.
Regarding the cost, I divide line arrays into three categories: 1) The obscenely expensive mainstream products like the Pipedreams and the Epiphanies. 2) The non-mainstream high end products offered by Selah Audio and GR Research, and 3) The DIY projects that use budget drivers.
If you have the money definitely choose alternative #2. I have heard Rick and Danny's arrays. They sound really good and even as completed ready-to-play speakers sell for less than half the price of the mainstream products. If you don't have $2,500 or more for a DIY enclosure kit, you are limited to alternative 3.
I'm aware of several budget DIY line array projects. Probably the best is the Linus I, which is no longer offered, but Jim Griffin will email you a copy of the plans for the asking. The Linus I uses twelve 5" MCM aluminum cone woofers (the shielded version of the driver that was used in the Bottlehead Straight 8) and six Silver Flute planar tweeters per side. The parts for this project will cost about $600, most of it for the twelve tweeters.
To get below the $600 cost you need to use a single tweeter instead of a planar array. I did this with the Fredarrays. It's not the best choice, but the single tweeter mated with the woofer array better than you would expect. Several people who heard the FredArrays at the Great Plains Audio Fest were impressed, one so much that he later bought them from me. I plan to build another pair soon. This time I will use the same Silver Flute woofers which, at $12.50 each by the case, are an incredible bargain and sound better than the $25 Vifa TC-series woofers they compete with. I want this one to be more SET friendly and plan to use eight per side to get a 16 ohm impedance. I also plan to use a better quality tweeter than the $12 MCM titanium dome in the original FredArray. possibly an Eminence compression horn.
The next step down the ladder would be to with for Parts Express to come up with another Vifa 4.5" buyout offer. These ususall go for $5-7 and sould pretty good. There's a good example of an array using these at
http://www.lonesaguaro.com/speakers/array/array.htm
The next step down from there would be an array using dirt cheap parts like these 79 cent Parts Express "factory buyout" tweeters at http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=279-010
I have some doubts about this extreme budget level. These tweeters have to sound terrible, like the tweeters in that Honda with a fart box subwoofer and cheap tweeters that pulls up next to you at the light with the windows open and rap music going full blast, and an array of 20 will sound like 20 spittng tweeters instead of one. Just my two cents.