2 Center Speakers in M-C/HT System?

Elevick, thanks for the response. This is exactly what I wanted to achieve but need to confirm with someone who has done it. So, according to your description, the tweeters for your center speakers are facing outward (to the outside). Right?

Keep them as close together as possible and it will work fine. My multichannel processor has two outputs for the center signal precisely for this situation.

Eldartford, what pre/pro do you have and are you positioning your center speakers so the tweeters are closer together?
Thanks.

Gaudio_eek...My pre/pro is a Rotel RSP-1066. I do not actually use two center speakers since my system is just for music and there is no screen to get in the way. However, two speakers on each side of the screen, and playing the same signal will image at the center of the screen...really better than you could do with a single speaker above or below.

By the way, Soliloquys are upside-down designs. My tweeters are on the bottom. I have the bottoms together. Make sure that you don't toe the speakers in. I would have them facing straight out.
I had to use 2 instead of a center because there is a support beam right up the middle of the wall.
My system:
Anthem AVM-2
HK Signature 2.1
Soliloquy sat-5's (6 of them)
Velodyne ULD15 II
Monster commercial grade speaker wire 12ga
Nordost Blue heaven interconnects