Rogue Audio Cronus Question


I'm just getting used to a new(used) Rogue Cronus (not the Magnum) - and I noticed that if I leave the tuner on (Aux 1) while listening to the turntable (Phono), some faint music from the tuner comes out of ONE of the speakers. It's in phono mode, and obviously I can get rid of the sound by simply turning off the tuner, but why would that happen, and how can I correct? Thanks.
doublenickelsonthedime

As others have said it's called crosstalk and the phono input is most susceptible because of it's high gain (relative to the other inputs which are line-level).

Use short, shielded phono interconnects and route them away from other cables. And just turn OFF your tuner when not in use, no big deal.
My Cronus Magnum used to bleed thru to the speakers ever so slightly when using the headphone section. It was enough my trying-to-sleep wife would complain.
All that sais and it is usually referred to as cross talk there may be another potential problem to consider, which is just your phono pre picking up true RFI. I had a friend with that problem and one solution was to use a Faraday cage. I do think it is your tuner. One sure way to be certain is to take the tuner out of your system and hold it in another room entirely. Check to see if you still hear it or not. If you don't go back to the other advice people have provided.
Pehare, I had the same exact issue with a Magnum and headphones. Sweet amp though.
Thanks for letting us know. That is a real downer especially since I was considering the Cronos Magnum.

An integrated amp that sells for $2295.00 should perform without glitches like you described. I would get Mike O'Brien on the phone this week before he shoves off to CES, and tell him you want the amp repaired so the bleed-thru does not happen Good Luck, Jim