Marantz AV7701


I am experiencing horrible humm issues with my 7701 setup.
7701 is connected via XLR to 5 mono amps. Combination of Bryston and Wyred.
The 7701 when connected creates a humm noise independently of volume. The higher the amp gain and speaker sensitivity the higher the noise. I have a suspicion there is some wrong with grounding or what have you?
All units are powered and grounded via a BELKIN Power Unit.
Any ideas? I am ready to ship the 7701 back but wanted to get your input maybe i'm missing something...
Thx
tsulzbacher
I'm using the 8801 with W4S and Bel Canto power amps.

I don't encounter a hum.

One of the main causes of the hum is the ground loop problem. Do you have a cable box attached to it? If you do, try disconnecting the cable box (power/HDMI/coax from cable etc) and see if the hum persists.

If it is still there, try unplugging all other inputs on the AVR to see if you can isolate the problematic source.
+1 on what DH said. Likely some other offending player such as a cable or satellite box. You can even try just the coax cable first as that's often the most likely source.
Tsulzbacher, I had same issue with my 7701. In fact, I went through three brand new units and calling tech support as well talking to my retailer. The tech support was not helpful, and said basically they had no idea. I replaced the 7701 with the 8801 and no hum, call support and asked them why, they responded with, the 8801 is a better unit. I never got a clear cut answer, but the 8801 worked fine, and tried the Yamaha CXA5000, and no issues, so stuck with that. My buddy has the 7701 mated with a Marantz amp, no issues. I'm thinking its compatibility issue with the 7701. My amp is a Mac MC205.
I've had the same issue with my 7701, i actually went through 3 brand new units all with same hum. I replaced it with the 8801 with no issues. Called tech support asked them why, and they just said the 8801 is a better unit. My buddy has the 7701 mated with the MM7055 and no issues at all. I believe its a compatibility issue with some of these. I checked all for ground loop and everything came back to the 7701. Called support for all my components and they believe it was the 7701. I went with the Yamaha CXA5000 at the end, cheaper than the 8801 and didnt lose sound quality. For power i have the Mac MC205.
Folks, thx for the help.
I did unplug the HDMI Channel from my comcast HD box and the hum disappeared. Seems, like one of you said, an issue w ground looping.
I would imagine the big challenge now is to solve the ground loop - Other wise my cable box is useless more or less.
Ts