Using Dipole Speakers in a Stereo System

Jcharvet, I bought some egg crate design open cell foam and cut two panels from it to match the dimensions of the transducer panels of the Odysseys. i had my wife and a grandson hold these panels about ten inches behind the speakers and started listening to solo guitar CD's.

At lower volumes I could discern no difference whether or not these dampers were in place. At higher volumes, though, there is a noticeable difference which seems better with the dampening in place. This difference seems as much related to an improved center stage as anything else. The bottom line is that this reduction of reflected energy improves listening for me, at least for this solo instrument.

Whether the felt panel works or not, it would be great if you let everyone know via this thread.

Additionally, some acoustic panel manufacturers make stand mounted panels. These positioned behind your M/L's may be less visible & hence, less likely to be an aesthetic issue.

Mrmb, I decided not to try the felt; the egg crate design foam seemed to more closely resemble the material used in anachoic chambers that I've seen. Also, felt actually seems like a fairly hard material, now that I've looked at it, and it may be somewhat reflective of sound energy itself.

Anyway, the design I'm using will be an attachment to the Odyssey cross brace holding the damping material approximately one foot behind the tranducer. I could easily be wrong in assuming this but, because of the curved design of Martin Logan panels, damping material closer to the speaker may work better.

If the egg crate foam helps, you may consider something with more of a broadband acoustic effect.

Several years ago, I built 2 DIY acoustic panels via Jon Risch's design perameters on AudioAsylum. My final floor standing-size products were 6'H x3'W x18"D. I'm still using them. But while researching these, folks mentioned that egg crate foam -- the type used as bed toppers -- although it looks like the foam used in studio's, it really wasn't, and didn't have the same acoustic properties. However, it certainly should give you the opportunity to learn (rather inexpensively), whether you're on the right sonic/acoustic track or not.

FWIW, Soundlab sells an item called the "S.A.L.L.I.E".

http://www.soundlab-speakers.com/#!__products/accessories

S.A.L.L.I.E.'s are mainly for those who can't pull their stats very far out into the room. They're rather expensive, but perhaps one could produce a similar DIY device.

I've also heard it mentioned that artifical floor standing plants behind dipoles also acoustically helps.

Mrmb, thanks. The foam that I got, and I should have been more clear, is not the cream colored rubbery stuff that one puts on mattresses. It is acoustical foam (polyurethane or polypropylene?) sold specifically to reduce hard surface reflections. By most standards, though, especially materials made for commercial anachoic applications, it was quite cheap. A 4'x8' sheet was less than $80 of which I only used about half.

Maybe now that I know it works I may look into trying some higher quality purpose designed material.