2. speakers
  3. 1381625318

B&W design quality observation. Any downside

I just took the baffle off a pair of B&W Concept 90 CM1's from 1991. I wanted to tighten the woofer drivers to the baffle. I was surprised to find the spider for the woofer was cast in 1 piece with the front baffle! Certainly no tightening required.(It confirmed the B&W ethic of good quality to me. The rubberized/elastic seal between baffle and speaker was also in perfect condition. I was left to tighten the tweeters to the baffle and the baffle to the body-which made a very noticeable improvement to the clarity, dynamics and smoothness of the sound
I am impressed by this design; it seems sensible when technically feasible as it absolutely eliminates any chance of loosening from the baffle-which is the bane of ALL speakers where the drive units are affixed to the baffle.
I wonder why some of these so called "ultra high end speakers (Magico, Yg Acoustics) don't use this type of design.
Is there a downside I am not considering?
ptss
paraneer's avatar
paraneer
818 posts
 
I know this is a little deep for you.

Yes, it can be heard and compared. The opinion given by the listener on whether it is wide and deep is perception. Nothing more. It cannot be measured.

So chill out Dude. As I said earlier, the world isn't ending just because there is a full eclipse of the sun.

Have a nice day in your alternate universe.
schubert
7,386 posts
 
A good tube preamp can 3D a 40 year pair of Advents.
hifial's avatar
hifial
332 posts
 
Bo, B&W's 800 Series Line IS NOT MADE IN CHINA!! They do make others in China.

HOWEVER, and this is not just for Bo, WHERE AUDIO EQUIPMENT IS MADE HAS NO BEARING ON HOW WELL IT SOUNDS OR IS MADE.

Some of the BEST sounding Audio is coming from Poland, Italy, Eastern Europe, Taiwan, etc.

If you want or believe that your equipment should be made in the USA, well God Bless, but that does not mean the other Audio equipment made elsewhere is inferior.

Schubert, I agree, it is SYNERGY. Even the room can have a great impact. And MOST people DO NOT know how to properly set up speakers to give their best sound (Bo, you hear me calling your name) so they look to better cables, amps, etc. Meanwhile all they had to do is move the speaker into the right position and BOOM it all falls into place.
It is NOT easy getting your speakers in the best position.

bo1972's avatar
bo1972
2,789 posts
 
There are still many speakers and amps as well who cannot give a very deep and wide stage. Ofcource it doens't matter were it is made. Audio is all about sound quality. There are many speakers which wil not give a lot of depth and wide. Most presentations at shows are 2-dimensional.
dave_72
1,399 posts
 
Bo: Again, you're referring to an old discontinued speaker, which is actually really good to be honest. Thanks for admitting that you've never heard the Synthesis line. I swear that you wrote that JBL are 2-D and lacking in depth with poor crossovers. I'm almost positive in fact. Imo, I think JBL Synthesis smokes Monitor Audio and is as good or better than the B&W 800 series. This is of course opinion, and not fact.
More to discover