You may still want to play with "sweet spot" for your VTF and VTA.
Using a record clamp is also encouraged.
Using a record clamp is also encouraged.
Damping the analogue "setup"
Friends,
I am fighting this issue for the last 1 year or so with my TT setup. I am a beginner in analogue playback but I use some decent equipments to play music. My setup is:
Nouvelle Platine Verdier
Naim ARO Tonearm
Lyra Skala cartridge
RCM Sensor Prelude phonostage
All the equipments are placed on wooden rack (made of Ebony) with spikes. The problem is, the overall sound can vary vastly from lean-strident to round-warm very quickly based on what kind of spike base I use underneath the rack. A typical metal (aluminium, steel, brass) spike base makes the sound lean and fast to an extent where it really bites. Whereas using a softer metal (cast iron) or rubbery/woody substance below the rack makes for a slow and boring sound.
It is not just the turntable that reacts so severely but also the phonostage. Placing the phonostage on a softer or a more damped isolation footer immediately reduces the grit in the sound. I do not hear such drastic reactions from my preamp or power amp. My guess is, the complete analog front end needs some level of damping. How do you go about it ? How do you choose the platform that will support the turntable setup firmly so that the sound doesnt lose its energy but still damp it adequately ?
For the moment (thankfully) my ARO is an un-damped unipivot designed to work without any damping fluid.
I am fighting this issue for the last 1 year or so with my TT setup. I am a beginner in analogue playback but I use some decent equipments to play music. My setup is:
Nouvelle Platine Verdier
Naim ARO Tonearm
Lyra Skala cartridge
RCM Sensor Prelude phonostage
All the equipments are placed on wooden rack (made of Ebony) with spikes. The problem is, the overall sound can vary vastly from lean-strident to round-warm very quickly based on what kind of spike base I use underneath the rack. A typical metal (aluminium, steel, brass) spike base makes the sound lean and fast to an extent where it really bites. Whereas using a softer metal (cast iron) or rubbery/woody substance below the rack makes for a slow and boring sound.
It is not just the turntable that reacts so severely but also the phonostage. Placing the phonostage on a softer or a more damped isolation footer immediately reduces the grit in the sound. I do not hear such drastic reactions from my preamp or power amp. My guess is, the complete analog front end needs some level of damping. How do you go about it ? How do you choose the platform that will support the turntable setup firmly so that the sound doesnt lose its energy but still damp it adequately ?
For the moment (thankfully) my ARO is an un-damped unipivot designed to work without any damping fluid.
- ...
- 29 posts total
- 29 posts total