2. analog
  3. 1399052598

JC3+ Anyone?

Hey Folks,

Despite my current economic situation, I am seriouly considering replacing my GCPH with a JC3+. I am have a few intermittent issues that may be the GCPH. I have a DV P-75 mkII in the system for testing. And it is as I remember, somewhat lightweight but pretty good. Not nearly as refined as the GCPH and a weak bottom end. Does seem to have more large scale dynamics than the GCPH.

So back to the JC3+, anybody try one or have one? Fremer liked it but his taste leans more to detail than mine. I like detail but my idea of detail is hearing the leading edge as well as the body of the note/instrument.

I would be using a Kleos with the JC3+ and the JC3+ would be going via Cardas Nuetral XLR to a Classe CDP-500.

Hope y'all well and good,
Robert A. Ober
128x128Ag insider logo xs@2xrobob
robob's avatar
Ag insider logo xs@2x
robob OP
202 posts
 
Hey Again Folks,

This testing is interesting. I may bore you with some of it later.

In the mean time, I am not convinced I have the azimuth of the Kleos correct yet. As I recall, there is a method of setting the azimuth using a voltmeter. Anybody know of a good article on how to do this?

Thanks,
Robert A. Ober
judyazblues
157 posts
 
Shameless
buconero117
2,311 posts
 
If you have any doubts about your financial situation, give it a rest until things improve. Chasing 'better sound' is no substitute for money in the bank.
fingerpaws
51 posts
 
I have a JC-3 with a Denon 100th anniversary version of their 103 cartridge. I use an ARC LS-17 preamp, and I have noticed there is a lot of gain. However, my system is completely silent, and the quality of the sound is wonderful. I suspect any noise would come from the preamp. The "louder" the preamp is set, the lower it's noise will be, so if it is set too "softly" there may be noise. I think it is just an unfortunate pairing. Parasound does make a big deal about how quiet their preamp is, so that may be their standard. I did have a problem with hum until I re-stacked my components and dressed the cables. I also decided to use Kimber Sliver Streak cables and they seem like a good match for delicate low level signals.
judyazblues
157 posts
 
And continued use of advertising in the forums
More to discover