Possible Upgrade Advice


I have a Scoutmaster/Dyna 20X 1.0mv VPI version on the JMW9 arm, using a Rogue Magnum 99 pre, looking for a little more detail if possible. Any advice in the $1500 or less range?
jsman
Latest model DV P-75 MK3 sells for $895.00 and matches really well with DV carts and this one supports 1mV MM/MC carts. Improvements over MK1 and MK2 models include:

•Multi-layer printed circuit board for even lower noise
•New output amplifier for lower noise and more drive current
•More headroom from internal power supply
•More loading adjustments, including user fitted R & C
•More gain adjustments
•Power supply polarity switched to center positive

I use the MK1 version with a Lyra Delos with GREAT results.

happy listening!

As a follow up guys I did some adjusting of the VTA/SRA and I don't think I need anything now!!! What I am hearing now is staggeringly better than what I had!!! I can't believe I thought it was right all this time...
Cool! Saved yourself $1500, and learned the importance of proper VTA/SRA set up all at once. Did you re-check the VTF? Changing VTA will affect VTF as well.
Nice Jsman! Also changing VTF will change overhang, this should always be checked after VTF adjustments.