2. analog
  3. 1409375383

First Table Setup: Org. VPI Scout

Ok I finally landed the VPI Scout off the GON. Now the realization that I need to either pay a non VPI dealer to align the Orfoton Blue or do it myself. Plain and simple I don't trust the dealer and I need to learn so here we go.

I have read through the process with the help of some threads but I have some questions.

I figure I a need tracking force scale, VPI JWM Tonearm alignment jig, level and print out of a protractor.

Do I need to buy a real protractor?
Do I need to buy a test record?
Should I get the Mike F. Stereopile Video?
Will the cart orfoton blue come with washers as to not mar the heads shell when tightened?

I want to set it up reasonable well but not trying to spend more than I have to to get a good result.

Thanks
darkstar1
darkstar1 OP
180 posts
 
Zd542

The link you posted states

"Overhang and offset angle adjustment must be performed with the aid of a precision mechanical instrument."

What do you suggest I use for this?
zd542
5,339 posts
 
""Overhang and offset angle adjustment must be performed with the aid of a precision mechanical instrument."

Use the alignment jig that comes with the scout. Its not hard to do. You just have to be careful when working with the TT, so you don't damage anything. But you should have no problem setting it yourself. Just take your time.
chayro
3,050 posts
 
Why don't you trust the dealer?
darkstar1 OP
180 posts
 
Chayro

I didn't buy the table from him. He does not carry VPI. He is the kind of guy who will tell you anything he does not sell is not good. Plus a lot of other issues. I just don't think he has an interest to do it right.
mofimadness's avatar
mofimadness
5,777 posts
 
I would be more than happy to set it up for you for free, if you are close to northern Colorado?

I have major extensive experience and all of the tools needed.

Just let me know.
More to discover