Thoughts on Audio Research D70


I recently saw a very well priced D70. If I remember back in 80's these were highly thought of. Having no chance to hear, what do they compare with today or do they?
128x128daveyf
@DaveyF: Totally understand the risks. I think the circuit is in many ways superior to the Classic 120s and VTXXXs I used to own, and provides more opportunities for asjustments, thats why my quest for this amp.

@HifiGeek1: Thx for the cautions. Guess I have been lucky. The only Hexfreds that have exploded on me was the IXYS bridges. Been lucky with fairchild 1200V stealth and ST 100V Schottkys. Knock on wood. The filament supply is good for 4 x 625mA (6FQ7), AC filament in parallel, and I am only changing 2 of those guys to 900mA. The 6922s use DC filaments (15VAC winding) and thats where I plan to use the 100V Schottkys.
Hi Johnsonwu, I may be misunderstanding your intent. If you are not planning on changing the circuit that is inherent in the amp, then there are no real risks that I can see.
BTW, I agree with you that the circuit is superior to the Classic 120's and the VT series..... this has been borne out in the listening tests that I and my a'phile group have conducted vs. the VT series and the Classic 60 that we also AB'ed against. ( presumably the Classic 120 is the same basic circuit).
I have yet to hear a better ARC amp in the mids than the ARC D70mk2, even in the ARC VS series of today.
The Classic series had triode configured output tubes. This tended to make the output tubes last longer and gave it a sweeter presentation. I believe the front end was fet transistor up to the driver tubes. Very different topology from the D-115mkII
@Hifigeek1: Yes indeed triode vs NON-Ultra-linear fixed bias tetrode mode. But same B+ @ output stage.
420V B+ is a bit low for my liking but with 4 tubes per side power should be more than enough.
I have every intention to convert that to triode at a later stage, after I am done with the caps and diodes.

I had the CL120 and CL150s before. CL120 at least has a tube driver stage (different plate voltage from D115 though). CL150 is just raw muscle.
Oh well. So much for the exciting anticipation for the amp.
Seller allegedly got talked OUT of including the original outer box by the FedEx people and the unit was shipped in the inner box only with less than a few pages of newpaper in the box so go figure what happened.