Ayre K-5xe preamp? How close to K-1xe?

I agree with Dmichael about not bothering with power conditioners. (I don't use them, and Ayre discourages using them with their equipment as well.)

However, I would recommend dedicated circuits for you equipment. These made a great improvement on the sound of my system.

Congrats on getting the K-1XE, btw. I am sure you will like it! (If you are into vinyl, the phono boards are very good, and well worth the price!)

I just auditioned the k-5xe and k-1xe with b&w802d + V-1xe amp. The differences between the k5 and k1 is not subtle. The k1 just did a better job of presenting the music in more real manner. Voices were more 3-dimensional and palpable. The k1 had more weight to tbe music while at the same time having a very light air to it. I know that sounds contradictory but to me thats the magic of the k1 vs the k5. Is is worth more than twice the k5??? I am not sure yet. I will be doing an in home audition of both preamps shortly. I am also going to be looking into the Plinius M8, which I hear also has a nice warm, tubelike sound like the ayre products.

One thing I did not like about the k1 (i know this is minor) was the loud noise the volume knob makes when moving. I also did not like the overall look of the k1.

How convenient is it to use the K-1xe preamp with a surround sound processor home theatre setup? Also how long is the umbilical cord between the K-1 main unit and the power supply unit Can you set them on two shelves, one above the other by about 6"? I can't find a picture of the power supply. How does it look?

My preamp and the power supply are well seperated by two or three feet. (The power supply is on the bottom shelf and the actual preamp is on the fourth shelf from the bottom. I "think" that the umbilical cord is about 4 feet long or so. (Maybe longer. It is behind my rack and I can't really see it without tearing it apart.
(The quick answer is to email Ayre and ask, or put a post on Audio Asylum's amp/preamp board, because Charles Hansen checks that board fairly frequently.

As far as the HT setup, I don't think there is a HT pass through on the K-1, but I could be wrong. (I have no desire to integrate my HT with my 2 channel stereo.)

As far as Tboooe's comments:

Yeah, it is a bit noisey changing the volume, but that is because of the complicated, but properly done, volume control. Because of this design, the remote volume control has virtually no sonic affect on the sound. (I would rather it be done right, and be noisy, than have it be done incorrectly, and be quieter.) Besides, when I am changinf the volume, it is usually because I need to make drastic changes to the volume. A single click or so is hardly noticable.

Personally, I like the looks. Of course I have the silver face mounted now. (I actually have both a silver, and a black face, as the previous owner preferred the black face and paid for the second face.) But then again, I like the look of my Lamm M2.1s too. To mea, a simple design is very elegant, rather than something more garish. (Although, I must admit, I did like the Manley Neoclassic 250 amps in the gold finish that my friend had for a bit.)

That should be perfect as far as putting it where I want on my shelves. Thanks for the info, Kurt. I have made a couple of phone calls to Ayre and talked with Steve and Michael. They are both so nice and helpful. I will call or email them about using it with my home theater setup. When I listen to audio I listen to two channel, but I think you can integrate it with HT, even without the processor input. There is a "Unity Gain" position on the volume control per the manual, and I think you would just set the Listen control to "video" and the volume to the unity gain position. At least that is what my dealer thinks, but he does not have the K-1 in stock. If that is not right, someone please enlighten me.