What is the "best" of the 5881 Tubes.

Thanks for all info. .... Valuable and appreciated.

I didn't find anyone that had any of the GT 12ax7M tubes in stock (even Groove Tube is back ordered). I did try a pair of Sovtek 12ax7WB's (that I purchased from a music store close by). "BIG" difference (lower/tighter bottom and way more open). I'm getting the feeling that these ONIX SP-3's are VERY-VERY tube sensitive. What a plus !! I have had a few amps that "tube rolling" did just about nothing at all for them. Pleasant surprize indeed.
I will take your advise on the SED 6l6's as soon as I get a new CD player in (one expence after another, isn't it). "TubeDepot.com" has the "Cryo" SED-6L6GC's for about 120.00 (a Quad). I'm thinking seriously about doing that. Haven't tried the Cryo tubes before but have heard some good things.
Have you played around with the 6dj8/6922's at all yet or the 12AU7's ? I would think that the 12AU7's would not have too much effect ( not by my experiences anyway) but a NOS (or better than "stock") set of 6DJ8s might... I don't want to roll all the tubes at once but I am a bit anxious to hear "all" of this "little jewel" of an amp.

Tubby

In a short answer to my own question, I dropped in a pair of NOS GE 6dj8 (6922)'s in the SP-3 and found a slight but very distinct difference. The GE's (similar in sound to the Philips imho) brought out a more "single ended" immediacy with a tad more "forward" presentation. The images are a bit more localized and a bit more transparent. Not whole bunch better, but a little. Combined w/ the 12ax7wb change, it is a lot. I'm sure that cost was a factor in selecting the stock tubes for the SP-3, but in all fairness, they did choose some musical ones. The stock tubes are very open and non-fatiguing, but they are in need of a bit of speed and texture (again imho).

Tubby

If you are still interested in getting the Groove Tubes 12AX7-Ms, you can get a pair from Torres Engineering in San Mateo, Califoria. Their Web site is: www.torresengineering.com. Their price is very reasonable and they also carry the SED 6l6GC power tubes. I haven't rolled any other tubes with my Onix SP3 yet, but I was thinking of trying out the Electro Harmonix 6922 and 12AU7 tubes next. I might even try NOS Jan Phillips 6922s. Just curious what speakers are you using Tubby?

Thank's for the help Rhing. I will give Torres Engineering a call later today. They seem to be the ONLY ones with the GT 12AX7-M's. I'm still thinking stongly about "Cyro" tubes (for the 6L6's), but they are a bit pricey. On the other hand, they last an awful long time.
My speakers are ones that the SP-3 should not be able to drive, but they do. They are the Genesis 400's. They are about 6 years old, made just before the Gennesis break-up and not continued in their new (and less conventional looking) line. They are kinda the "forgoten Genesis" (along with the 300). A tough nut to drive. Their signature is a VERY smooth and OPEN sound, with ttttight bass and silky highs (the Genny tweeter is about the best around). Drum solo's will scare the normal mortal, and some audiophiles.
We are "low level" listeners in this house, so the need for power is not a tremendous issue. The SP-3 has work out just fine so far. I think with the added benifit of rolling the tubes to match the rest of the system, it may be a perfect match (for us anyway).
The next venture is an Onix XCD-99.

Tubby

I like Telefunken, Amrpex, or BRIMAR 12AX7's When it comes to the 5881 ( 6L6 ) I'm not a big fan of the Tung-Sol. Very sweet but at the same time, to mushy for me. I prefer some of the big bottle 5881's such as the GE or RCA. But it depends on the user I guess.....

But i agree with what was said above. Try changing the 12AX7 first.