2. amps-preamps
  3. 1149977018

Tube newbie - recommendations?

I've finally got my primary system (all SS) at equilibrium and would like to set up a second system for casual listening and explore the world of tubes.

I already have a pair of B&W DM601S3 speakers I would like to build around. Music will be broadway, jazz and some classical, possibly satellite radio in the future. Looking for a fun, lively and colorful sound.

Listening room will be open kitchen / dining area (~20x20, low ceilings). Volume levels will not be high but should be enough to drive the B&Ws comfortably.

Some extra components laying around that I can pick and choose from:

NAD 5000 CD player
Carver CT3 Pre-amp / Tuner
Carver TFM15cb amp

I only need one, maybe two inputs, no phono. Already have some Kimber PBJs and biwire spkr cable laying around. Would you use the CD and Carver Pre and get a tube amp or perhaps a tube integrated or hybrid like a Jolida? How little money (<$500, used ok) can I put in to this system and get a nice intro to tube sound? Any recommendations would be much appreciated...
devsung
hiend312cdfe
22 posts
 
Ive had several amplifers cosying Much more then the rogue 120 magnumas or regulars. They are excellent performers and truly worth every penny. they are quick clean powerful controled bass, if you need a bit more of the Lusher midrange type sound roll in dome mullars tubes. these amps sound great at low levels and dont distort AT ALL when asked to jam. They are not perfect either are amps costing 2-3 times as much
surfgod
229 posts
 
There are plenty of hand wired Int. tube amps that are coming out of Agon. For the speaker in question you will require a Push-Pull type of tube amp since its sensivity, I think is betwween 86-88 Db. I think that the push-pull is your best choice.
devsung OP
3 posts
 
Thanks everyone for your feedback.. it sounds like the Jolidas might be a bargain but you get what you pay for in build quality. Not looking to spend 1k+ on Rogues but perhaps I can find something used.
lowfidelity
40 posts
 
I have had great success with the Sound Quest SQ-84 tube integrated amp mated with AAD 2001 monitor speakers. On paper the mating makes no sense at all. The 2001s are only 86 dB speakers that are recommended to use with 50 watt minimum. The SQ-88 is a push-pull using 6v6 tubes and produces 10 watts. As strange as it seems, this combination actually works wonderfully, producing excellent mids and a full bottom end. Perhaps an SQ-84 and DM601S3 mating would work well too.

Another option is to try the new Dnynakit 35 tube stereo block. It produces 17.5 watts per channel, is reasonably priced, and sounded very nice at the VTV show. The build quality is up to you as you'll have to build it yourself.

Enjoy!
.
lowfidelity
40 posts
 
Naturally, I meant "Dynakit" not "Dnynakit". Sorry about that. :-}

Enjoy!
.
More to discover