tubed preamp off and ss amp left on?


Why can't I leave my my ss amp turned on with the tubed preamp turned off? Loud hum occurs through speakers with this condition. When I had a ss preamp I could leave the amp powered all the time with the pre off. I would leave all powered up but concerned about the preamp tubes wearing prematurely. Is it a reasonable conclusion that I could leave everything powered on all the time and just change the tubes once per year?
twc
I don't know what your problem is but I leave my amp on 24/7 and turn my pre off with no problems.ARCLS26 and 300.2 amp. Don't leave your tube pre on 24/7.Along with burning out the tubes it could present a hazard.
It might be helpful to know what equipment you have, including cables. I have a Belles 21A tube/hybrid pre with a Belles Reference 150A SS power amp and I leave my power amp on and turn off my pre and never have had a hum.
I would not leave a tubed pre on 24/7 and only leave the amp on when you are going to be around it and in general not over night. I do on occasion leave my ss amp on overnight but as a general rule I turn it off. Having said that you should not get a loud hum when leaving the amp on with the pre-amp off. For qualifiers I have a cj tubed pre amp and cj ss amp.

If the preamp has a mute feature, switch the preamp to mute before you shut it down. See if that helps.

Otherwise you best turn off the power amp first then shut down the preamp.
I can't figure out the possible reason for your hum, but be patient. There will be a 'goner that will set you free. Fortunately (shortens my waiting time for optimum sound) my SET rig has a standby/idle feature on both the amp and the pre. The amp is good to go after the 845s have 30 minutes on them and the pre just has to wait for the amp/845s to catch up. Idle would be a nice feature on all tube pre amps and amps.