The only way I know of to accurately evaluate any components insertion into an existing system is to have references (recordings) which are an intregal part of your musical memory and represent instruments, including voice, which replicate your impression of their sound live, or as close to live in the most important aspects of that sound that can be recorded.
For me piano, solo horns, and voice reproduction is critical and very revealing. I'm familar with their sound live and proper replication is very important to me. I do not use large group performances or electronic music to judge - one's not capapable of reproduction on any approximation of live, and the other is too variable as to be identifiable to anyone except the person with the gear. IMHO.
Once you have recordings which from past experience you know to represent the best reproduction of the sources in your extant system its easy to judge the capabilities of an inserted component, in your case a pre-amp. You do have to listen to the sound segmented. Unless you are a musical savant its incredibly difficult to in any reasonable period of time to identify minute differences in high quality components.
For me distortions of high frequencies and upper mid frequencies are far more important than lower mids and bass which in real life are too variable depending on the recording environment. Then I listen carefully to the the segemented sound for sounds most linear and clear/transparent, consequently natural. I probably am listening to an octave at a time.
If you want to insert a pre-amp into an existing system and you want to minimize the differences it can introduce you are going to have to insure that it has the capability to drive long cable runs without creating impedence issues, noise issues, and plain old sonic issues. This is both pre-amp and IC related. You will also need to insure that it has SOTA volume control. Bewarned, even with the greatest dilligence, and the best (read SOTA) pre-amps you will not be able to replicate what you have now, so it will be seeking out the lesser of evils (to you).
I hope that makes a bit of sense to you and helps.
For me piano, solo horns, and voice reproduction is critical and very revealing. I'm familar with their sound live and proper replication is very important to me. I do not use large group performances or electronic music to judge - one's not capapable of reproduction on any approximation of live, and the other is too variable as to be identifiable to anyone except the person with the gear. IMHO.
Once you have recordings which from past experience you know to represent the best reproduction of the sources in your extant system its easy to judge the capabilities of an inserted component, in your case a pre-amp. You do have to listen to the sound segmented. Unless you are a musical savant its incredibly difficult to in any reasonable period of time to identify minute differences in high quality components.
For me distortions of high frequencies and upper mid frequencies are far more important than lower mids and bass which in real life are too variable depending on the recording environment. Then I listen carefully to the the segemented sound for sounds most linear and clear/transparent, consequently natural. I probably am listening to an octave at a time.
If you want to insert a pre-amp into an existing system and you want to minimize the differences it can introduce you are going to have to insure that it has the capability to drive long cable runs without creating impedence issues, noise issues, and plain old sonic issues. This is both pre-amp and IC related. You will also need to insure that it has SOTA volume control. Bewarned, even with the greatest dilligence, and the best (read SOTA) pre-amps you will not be able to replicate what you have now, so it will be seeking out the lesser of evils (to you).
I hope that makes a bit of sense to you and helps.