2. amps-preamps
  3. 1179939807

MC TRANSFORMERS VS TUBE PRE PRE

Has anyone here had much experience comparing mc step-up transformers vs. tube pre pre amps? Several things conspired together to cause me to send my Counterpoint SA-5.1 to Alta Vista in order to have the Sowter 8055 transformers installed. I own a Counterpoint SA-2 pre pre amp which was simply magical with the SA-5.1. Unfortunatly, my SA-2 broke and then my listening room was flooded out (thus the conspiring events). When my listening room flooded, I decided to take the "opportunity" of my music downtime to send the 5.1 back to Mike and have the Sowter mc transformers installed as an "upgrade" and then not have to worry about having the SA-2 repaired. After all, the Sowters' were supposed to far superior to the SA-2 and it would remove a bunch of tubes from my system by replacing the SA-2. Well, my listening room was fixed from the flood and slowly my system came back together again. When I installed the SA-5.1 back into the system with the Sowters' now in place, I was bummed to say the least. The magic was gone. In its place was a homogenized, dumbed-down version of what my LPs used to sound like. Had I not known any better (i.e.; I didn't know what information was really on my records), I would think the Sowters' sounded really good. However, I do know better. My question to the forum is does anyone else have any experience going from a quality tube pre pre and switching to transformers? I don't mean to pick on Sowters' in particular, they are just what I have installed and Mike feels they are the best of breed. I am beginning to think that the problem lies in using any mc transformer. At this time my SA-2 is in route back to Alta Vista to be fixed. I am going to send my SA-5.1 back and have the Sowters' removed and my phono stage restored to the way it was. I want the magic back that I had. And the magic that I am speaking of is the difference between your system sounding like live musicans are playing in front of you with all of the dynamics that implies vice having a system that sounds very "nice" in the usual audiophile sense that would impress people who didn't know better. For the record, my system consists of the VPI TNT MKIII with the new 300 RPM motor, ET-2 tonearm, Denon 103R cartridge which replaced my Van den Hul MC-2 special which it simply smokes, Counterpoint SA-5.1 pre, and Quicksilver MS-190 amp on the main speakers. I have a DBX electronic crossover that feeds a pair of Denon POA 6600A monoblocks for the subs. My speakers are my own designs. They are all (main speakers and subs) 1/4 wavelength transmission lines. Bottom line is that before I ever take another blind alley on "upgrades," I want someone to come to my house and show me that what they have is better. For the here and now, I would step over all of the mc transformers out there in order to get my hands on a SA-2. And if anyone has heard another pre pre that bests the SA-2, please let me know what it is. One last tid bit. If you have a British copy of the Beatles lp Abbey Road, listen to the beginning of Sun King. Let me know if you can hear Ringo hitting the cymbals with a mallet, and if you can hear pressure waves coming off each of those strikes with differing dynamics. If the answer is no, it just sounds like cymbals being hit, you are in the "missing information" catagory which is where I am currently back to with mc transformers.
mepearson
mepearson OP
100 posts
 
If I had a Counterpoint SA-9, I would not have mc transformers installed. What I find ironic about Alta Vista upgrades for the SA-5000 and the SA-9 is that Mike removes the SS components from the phono sections so that now they don't have enough gain anymore to run low output mc cartridges straight in. With both the SA-5000 and the SA-9, he is stripping them down which makes them more like the original SA-5.1. Even though some people may think the SA-5000 is a better preamp than the SA-5.1, I think it is only better in terms of ergonomics (two sets of outputs, cartridge loading on the front panel, lots of gain on the mc input). The SA-5.1 has a more sophisticated tube regulated power supply. Back to the main point, I think that active mc preamps sound better than transformers. Therefore, if I had a SA-3000, SA-5000, or an SA-9, under no circumstances would I have that phono stage altered to remove the J-FETs that give it the added it gain it needs for low output mc cartridges. Right now, I just want my SA-2 back and my 5.1 phono stage restored. Those two pieces are MAGIC together. Maybe the combo should be called the SA-10.
swampwalker's avatar
swampwalker
5,138 posts
 
FWIW, I am pretty sure that the Doshi pre-amp uses Jfets in the phono gain stage (at least for LO MCs) and it sounds wonderful, IMO.
thekong
203 posts
 
Hi Mepearson,

I also have a Counterpoint SA5.1, which I am considering sending to Alta Vista to have the line-stage upgrade, and have the phono stage converted to the SA9 Jr. status. I wonder whether you got the phono/line stage upgrades, or just have the MC transformer installed?

As for your SA2, are you just sending it in for repair, or getting some upgrades on it also? They didn't list anything about SA2 upgrade in their site.

Thanks,

Michael
mepearson OP
100 posts
 
Michael,
My 5.1 has had the line stage upgraded, all rca jacks replaced, one set of tape outputs was converted to another set of main outs, the phono stage was upgraded, and the mc transformers were installed. Quite a lot of upgrades.

As for the SA-2, I am only having it repaired. It sounds GREAT as is. The reason Mike doesn't list any upgrades for the SA-2 is that they are very rare. If they were being made today, the price would probably be $3K. He has the comment "contact me for upgrade info" listed under the description of the SA-2. Knowing what I know, if I were you, I would keep my eyes out for a SA-2. I would consider having your phono stage upgraded, but I wouldn't add those transformers on a bet. If you want transformers, I will give you a good deal on mine when I have Mike remove them. I have the latest and greatest Sowter 8055 transformers and they were just purchased and installed in March.

As for the 5.1, most people don't realize how special the power supply is and how great the preamp really is. Not to mention the fact that it looks cool as well. Most tube preamps use cheap diodes for rectification and they may be followed by some SS voltage regulators. Some expensive tube preamps may use a vacuum tube rectifier, but most still use SS voltage regulators. The 5.1 uses all vacuum tubes for voltage regulation and rectification. The SA-2 also uses a vacuum tube rectifier and all tubes for voltage regulation. In fact, if you look at an SA-2 on the inside, it is very close to how the 5.1 looks. I had a CAT SL-1 Signature MKIII preamp and I sold it because I think the SA-5.1 is better sounding in a way that makes music seem live. That is the trait that Michael Elliot seems to have mastered with his better designs. They sound real. If the big knock against tube mc head amps is that they add some noise compared to SS or transformers, give me the noise any day because when the music starts you don't hear it and I would much rather have something that sounds like live music is being played in my room vice something that specs out great but dumbs down what is in the grooves and robs the life out of your system. Like I said before, had I not heard the 5.1/SA-2 combo work their magic and I didn't know what was really in my record grooves, maybe I could have lived with the transformers. Now I can't and won't.
thekong
203 posts
 
Hi Mepearson,

Thanks for the detail reply. When you get back he SA5.1 with the MC transformer removed, I would be very interested to know how does it compared to the original unit before the upgrade.

Thanks in advance.

Michael
More to discover