I have a Cary SLI 80 with a pair of B&W CDM-1SE's. They sound very good together, the Cary in fact is an upgrade from my McIntosh MA6450. I am not completely in love with the Cary & in fact may switch back to a different Mac but they certainly work well together. I would say you will drive the 703's fine with the Cary.
Cary SLI 80 with B&W 703 will it be a good match?
Looking to add a tube-based integrated to my setup. I already own a pair of B&W 703's and really like them, my only grip is that they aren't exactly an easy load for most amplifiers.
I haven't found much info about their impedance curve but what I did find is this (ultimateavmag):
- Minimum impedance is 2.8ohms at 100Hz.
- Impedance remains below 4ohms from about 79Hz to 400Hz
- I would conservatively rate its nominal impedance at 4ohms.
- The 703's sensitivity measured about 88dB/2.83V/m
My source is a squeezebox v3, I don't listen to music at very loud levels. The output is typically 80-85dB (or less), I still want there to be sufficient bass at that output level though (ideally it shouldn't add or take away anything bass-wise).
I haven't found much info about their impedance curve but what I did find is this (ultimateavmag):
- Minimum impedance is 2.8ohms at 100Hz.
- Impedance remains below 4ohms from about 79Hz to 400Hz
- I would conservatively rate its nominal impedance at 4ohms.
- The 703's sensitivity measured about 88dB/2.83V/m
My source is a squeezebox v3, I don't listen to music at very loud levels. The output is typically 80-85dB (or less), I still want there to be sufficient bass at that output level though (ideally it shouldn't add or take away anything bass-wise).
- ...
- 5 posts total
- 5 posts total