Triode versus Ultralinear/Pentode

I asked that question on AudioCircle in the Manufacturer's forum and still have not gotten an answer. To some exent I hesitate with the idea of the mod (he did not object to the idea), thinking if it was such a good idea, why didn't he do so from the begining - could be the amp has more universal application run in AB2 Ultralinear. I know by going to triode, he pull back on the NFB which appears to always be a good thing with my Merlins. I agree in principle (with no engineeering knowledge whatsoever) that it is best to have a unit optimized for one type of operation or the other - the logic of that makes sense to me.

Pubul57, Merlins don't need a lot of power. We have had many Merlin customers over the years using our M-60 and I never hear about power issues. If you can get a triode amp that makes at least that much, unless you are in a very big room you should be fine!

With Merlins it all about finesse rather than power- they are plenty revealing- going triode with them will definitely pay off.

See if you can find one of these for sale: (http://www.stereophile.com/tubepoweramps/1200cary/) You won't do much tube tasting as far as the output tube(T-1610) 'cause there's only one company that makes them(KR). Then again there's the price of a pair of those glorious triodes. At least they'll give you 100 watts on peaks. BTW: If you can afford those- Are you interested in adopting a son?

I'm not so much worried about power, as the Music Reference RM9 SE would be 70 watts in triode - way more than enough for my Merlins, I'm thinking about whether converting an amplifier from ultralinear to triode makes much sense if the amp was not desinged for triode operation from the ground up; I just fell there must be some compromise in this apporach rather than being built and spece'd specifically for triode appplication, like my CAT JL2.