pro logic unit instead of 2 channel preamp?

Hi Folks,

just a quick update. I got back from my trip last night and checked the local craigslist. A guy up the road was selling a Rotel RSP-960ax for $50 so I snapped it up today. This is the older Pro Logic processor with a 2 channel stereo option. I've wired it with the Rotel rb980bx that I bought off agon and the system really shines. It has brought much more detail and bass response out of my Boston bookshelf speakers.

Now onto the DIY speaker project.

thanks everyone for your response and guidance.

Steve

Although you have resolved your problem, I'll have to add that in my 2-channel mostly LP-based living room system, I'm using a previously sidelined Outlaw Audio 950 7.1 ch. pre/pro because of the 4 preamps I have available, the Outlaw in 2-channel all-analog bypass mode is the most transparent and fastest, brings out the best in the dynamics of the phono preamp feeding it, but never turns harsh or edgy. It's an awful lot of box and wasted circuitry to get a good 2-channel analog section, but it works really well, and of course it has remote which has spoiled me.

The others? Amber Model 17, Parasound ZPre (version 1), VSP Labs Straightwire II, and Hafler Series 915 Class A J-FET line stage (the preamp to match their later TransNova series amps). Only the Straightwire II equaled the Outlaw, but lost out because at 20 years it's getting a bit dodgy, occasionally dropping a channel when switching. And no remote.

Hi Johnny,

thanks for your suggestions and they certainly won't go in vain as you can imagine, I've caught the bug pretty bad and will likely be tweaking and trading for some time.

since my past post, I couldn't get past the 960ax's lack of bass (great reproduction other than that) so I traded it for an RSP980 (I can't believe how inexpensive these old pro logic processors are.) The RSP980 offers much better detail, better bass, better dynamics. Clearly a superior unit.

Meanwhile, I've finished my DIY kit. I went with GR Research kit speakers and I couldn't recommend them highly enough. They are really opening up and I'm loving the overall sound I'm getting.

I can see now that the 980 is very transparent, but a bit too bright. I'll keep it for quite a while, but my next move might possibly be a tube preamp and I'll also be snooping for the models you've suggested above. I've heard a lot of great things about outlaw and also heard about some reliability issues with them.

I'm researching interconnects and speaker wire and hearing massively different opinion. Currently my speaker wire is home depot and interconnects are one step up from wal mart. A friend of mine runs a commercial AV install company, so I can get wire and connects for cost, so I'll likely end up with DIY interconnects and speaker cable, in keeping with my budget audiophile ways.

Steve

Steve
I would recommend the Proceed PAV as a great processor and two channel pre-amp.It goes for $500-600.If you want the companion PDSD(it adds Dolby digital) the price is usually $1000-1100.They are great products.You can also look for a used Proceed PRE.
George

I would look at old Lexicon units for this.