Class D amp with Tube Preamp Combo?


Have you ever tried a good class D/T amp & tube preamp combination? I have read their can be some occasional problems matching these together?

I was thinking of going this way to get the drive, clarity and efficiency of the switching amp combined with the warmth and full body of the tube pre amp.

What setup are you using?

My first post by the way! I have been reading this forum for the last two weeks learning about audio and what to buy for my first serious system.
jaffa_777
forget to mention, mine is 400ohm output from pre, 25k ohm input on amp, does it mean very bad matching?
Grandetech, from an impedance match you should be fine. Your ratio is 25000 / 400 = 62.5. I suspect that anything greater than a ratio of 25 is above the 'waterline'. G.
I'm not after more mid range warmth/bloom from the new Bel Canto as the existing setup (not from the Bryston 4BSST) has a bit of that compared to other systems i've heard. I was hoping for more resolution and more dynamic sound from the new pairing.

In terms of impedance matching, i think the Supratek Chenin has about 600 ohm output impedance and the balance inputs on the Bel Canto are 20 ohm. Surprisingly, i have to dial up a bit more volume control to make the sound come alive when compared to the 300W/500W 8/4ohm Bryston.

I've asked the seller for their background and he stated they have about 150~ 200 hours playing time so i will give them more time to burn in and report back later if there's joy to be had.
Jaspert, with 150 to 200 hrs on them, the Bel Canto are likely not even a quarter broken in. If at about 1,000 hrs of making real music -- not idle time -- they are still not of your liking, it may be time to move on. Do keep us posted.
Has anybody tried the Red Dragon Leviathans?
I saw a set in the classifieds and checked out the reviews I could find online. All good reviews. I have magnepans and a tube Rogue Perseus Pre. Using a Rotel SS right now.