Preamp or A/V receiver???


Hi. I posted a similar question recently but didn't receive the response I thought I would. I'm wondering if a decent A/V receiver is inferior/superior to a tuner/preamp unit such as the Adcom GTP-500II. I currently use my Onkyo Integra DTR 6.3 home theater receiver as my tuner and preamp. I run my Arcam 8SE hdcd/cd player through the A/V receiver, using GlowPower ZYXT interconnects, to my Adcom GFA-555 amp (200 wpc @ 8 ohms). I use solid Audioquest Hyperlitz speaker cables to connect to my KEF Reference 103/4 tower speakers (4 ohm). To my ears the system sounds excellent, but I can never seem to be satisfied. Because I thought the A/V receiver was likely inferior due to the extra electronics (internal DAC, surround sound components, DTS effects, etc), I purchased a nice Adcom GTP-500II tuner/preamp (with remote) on ebay. Both the Onkyo and the Adcom use gold-plated rca connections, and both offer phono inputs. The Onkyo Integra is Malasyian made (surprisingly), while the Adcom is of course a US product. I haven't received the Adcom preamp yet, but I'm wondering if I made the right decision. Any thoughts??
klipschking
I agree with the other posters. What we tell you should have no impact on your decision, because you'll have the ultimate test available to you. Just listen to both and keep the one you like best.

Michael
OK, OK, I get it. Although I've been listening to music for 40+ years, I have only recently moved from the "big box" products to what you might consider entry-level audiophile gear. I do trust my ears, but I also want to benefit from the experience of others who are more familiar with separates, and higher-end audio equipment in general. Even though the Onkyo A/V receiver sounds good with my system, it didn't seem to make sense to use it as a tuner/pre-amp from what little I know about electronics. For what its worth, the published "specs" for the Adcom are slightly better than the Onkyo, but I'll post when I make the comparison.
Gold-plated connectors are meaningless as an indicator of quality, they are everywhere these days. A good preamp will kill an A/V receiver every time, but I'm not sure that the Adcom qualifies as a good preamp - as a tuner/preamp, it is more like a receiver than a stand-alone preamp. As the others said, you listen and make your decision.
klipschking.

The receivers are never good enought for 2 channels listening.PERIOD.Get your self a proper 2 channel amp-preamp/intergrated.there is no 2 ways about it.
If you want to know whether that particular Adcom is better or worse than that particular Onkyo, then you can make that determination as you have both units. It really doesn't matter what anyone else thinks.

However, if you want to know as a generality whether a receiver is better than tuner/preamp, then I think that the answer is not absolute. It depends on the particular components. Usually, the receiver is not as good, but it doesn't have to be that way. Receivers are typically built for the mass market, or the entry level audiophile market. Price is an important consideration at this level, so the manufacturers shoehorn in as much as they can so the consumer gets more for their money, so to speak. And they use cheap parts. And they have a big honking transformer that is unshielded and emitting an electrical field that is interfering with the sensitive electronic components. And there's a single power supply for all the channels.

Now if a manufacturer wants to, they could (and some do)make a receiver with separate power supplies for each channel, everthing is shielded, the preamp section is totally isolated from interference, etc., etc. In other words, it's just as good as "separates". But the price will be a lot higher. However, the market for higher priced products, i.e. the audiophile, typically doesn't want a receiver. They want separates so they can upgrade and mix and match more easily. As a result, there are not whole lot of really, really good receivers that would best good separates. It would be better than poor separates though. Being a separate doesn't mean that corners can't be cut to save money.

So, in the end it still comes down to the particular units being considered. The receiver may be better or it may not be. You decide which you prefer. Myself, I think the Adcom should be a little better than the Onkyo's preamp section. But I don't know for sure since I haven't heard them. You have them so you tell me.

A couple other points.

I don't think the place of manufacture is important. It's the ratio of quality level to price point that's important. If it's a well made product, I couldn't care less whether it was made by gnomes living beneath the mountains of Switzerland. Your "Made in the USA" product could quite possibly contain electronic chips, or other parts, made elsewhere.

There's a lot of variability in how specs are measured. It's difficult to compare them across manufacturers. Use specs as a guide but trust your ears for the final decision.