Best EL-34 Amps?


Looking for votes/recommendations on the best available EL-34 mono-blocks... I have tired many different amplifiers over the years including 300B's, SET's, EL-84's, 6550's, all manner of solid state (nasty!) and haven't found anything that bests' my VTL-125MB. However, they ain't as young as they used to be and I have always wondered if the magical pair of EL-34 mono-blocks are out there and have just slipped my attention. They must be very quiet, since I use extremely sensitive Klipschorns (104db)...any noise is ruthlessly revealed...
stickman451
None. The El-34 is the WORST sounding audio output tube ever made. There is no way to make it sound like anything but a freight train. It has no redeeming sound qualities. I suggest trying a 6L6, 6BQ5, or a 45 output to hear the music instead of headache creating NOISE.
hi mint604:

what is it that you specifically object to about the el 34 ?

some of the older conrad johnson amps use them,quicksilver amps use them and other tube amps use them as well.
The El-34 (6CS7) began life in the mid-fifties as being the highest power pentode. It was designed for use in Walt Disney "Fantasia" film. It trickled down to consumer use and was sold to sucker "hi-fi" enthusiasts in the late 50's who could then boast to own a 50 watt amplifier
(compared to other amps at the time which had only 25 watts). The problem with this pentode is that they need much higher voltages and more elaborate circuitry than other output tubes (6l6, 7591 at 325 volts). At over 450 volts this caused the chassis to get very hot and all the componets to change values and become introduce noise. I owned a Marantz 8B that had a dull and lifeless sound due to the 6SC7's, it was noisy and had a compressed sound, unsable with horns. I have a pair of pro Altec amps that also use these tubes and the sound is the same as the Marantz. I have yet to hear any El-34 amp that sounds good and enjoyable. The El-34 should be classified with the 6550 as being higher powered but "non-hi-fidelity"