Non-current limiting power conditioners

True enough,if you use 15a,20a outlet(That's all you'll get)
pre,cdp,dacs don't need much power.Power amps seem to like alot more at times.I'm using Torus and their transformers are huge.If my memory is correct it can give you up to 400a(short term).There is alot of info on the audiocircle site.I use to use Shunyata before and HOLY COW,what a difference the Torus
makes.A huge,huge upgrade.They are pricey(rm-20a-$3200.00,
rm-10a $1800.00.they do have smaller ones also.
I believe you would add up maximum amperage that each component can absorb at full power and divide by 2/3.
For me 5X7Bs=5X16.5a(at full power 4ohms)82a and at 8ohms 41a.
So 2/3 of that is 65a at 4ohms and 27a at 8 ohms.Except for my power amps,I would never sell the Torus,She's too good.

I also use a few Alan Maher's Power Enhancers. They are great products and one can customize the sound by putting them in various locations.

My only issue with it is that it takes a long time (days and weeks) to stablize the sound. Before it gets stablized, the sound is good one day and bad another.

Every time you power down the system for some time and the stablization process re-starts, which is annoying.

My recommendation is to have dedicated 20 amp lines run to your outlets (if you don't already), but even more important have your electrician install a dedicated isolated ground and have all your dedicated audio receptacles use this as common ground.

http://cgi.ebay.com/Isolation-Transformer-240-120-to-120v-4-8-kVa-Rack_W0QQitemZ320283133608QQcmdZViewItem?hash=item320283133608&_trkparms=39%3A1%7C66%3A2%7C65%3A10%7C240%3A1318&_trksid=p3286.c0.m14

There's a 5KVA Topaz listed for $1000 too.

Dedicated ckts? They aren't the 'end all be all' in providing clean power to componenets. All they do is limit, NOT eliminate, in house 'born' artifacts. Remember, voltage and current need a path to flow. A complete round trip path. The neutral side of the power lines, dedicated or non dedicated, are tied together at the ckt breaker box. Consequently, so is the common or ground leg.

Through those two paths, one more so than the other unless there's some default somewhere, ALL the house power is in the end seeing each other's strengths and shortcomings.

Dedicateds do reduce issues, but they won't eliminate them.

The suggestion of true isolation as said above, by isolating BOTH the neutral, common and powerlegs via Tformer, and iso'd ground is the best bet. Period.

Even still, there can be issues, albeit depending upon the build and design of the iso Tformer, remember, even that is attached to the incoming power line to the home.

I believe that incoming feed is primarily where we get much of the nasties we endure, ignore, or deal with in our audio & video systems.... not from the home itself. Or at least not as much.

That's why so many feel it a more cost effective way to go by using dedicated ckts + a PLC. So unless you're starting from scratch and just now building a dedicated entertainment room, just join the pack and do the now priceier "Agone try & buy shuffle" to find what fits the billet for you and your's.