How important is S/N Ratio....?

if it is just thermal background white noise that is totally unrelated to the audio signal then you have a great piece of gear

I thought I would add that this is why analog tape hiss or Vinyl road noise (apart from wow and flutter) is not a big deal - we hear the music through this provided it is random noise.

" If you have equivalently low levels of noise but when music is playing you have within it some correlated noise that follows with the music (harmonically or IMD related) then this gear will sound much worse (even if they both share the same "on paper" S/N ratio)"

So what your saying is distortion effects the S/N or not...when measured.

"if it is just thermal background white noise that is totally unrelated to the audio signal then you have a great piece of gear"

Ok so more inner detail...subtleties....Clarity......Focus

But let's ponder this.....if distortion effects what we hear......wouldn't the S/N....true measurement...measure the distortion present in the amplifier. So the higher the S/N the lower level of distortion present in the device..amplifier.

That would in theory effect....soundstage,imaging percieved and also bandwith of the amplifier.

Also the componet with the poorest S/N would be the weakest link in the chain...hmmmm.

Specs are near-meaningless. At best, advisory.
Don't worry about them. Would you junk out an amp you liked with a 90db snr and replace it with an amp you Didn't like with a 110db snr? Didn't think so.

from wavetrader:
If you have equivalently low levels of noise but when music is playing you have within it some correlated noise that follows with the music (harmonically or IMD related) then this gear will sound much worse (even if they both share the same "on paper" S/N ratio)"

Just what does above quote mean in standard English?

But let's ponder this.....if distortion effects what we hear......wouldn't the S/N....true measurement...measure the distortion present in the amplifier.

What I am saying is that S/N on its own is pretty meaningless(unless it is really bad and then it is a warning flag). It is just the background noise level present. This is why many specs are given as THD + N...

Just what does above quote mean in standard English?

I tried to say that noise at specific frequencies and that may be modulated by the music signal is far worse then just background wide spectrum random hiss...

This is why tape and vinyl works well even though it has a high level of surface or background noise.

Sorry for the bad english - I type fast and rarely check.