I demoed the XLS1500 in my system several months ago, and agree that it is a mighty fine amp for the dollars asked.
THe best sound (for me) was using the XLR inputs (I used a custom RCA-XLR IC) and the SpeakOn connectors. And topped off with soft 'squissy' footers.
The stock RCA in and banana-speaker post exhibited that harshness you are hearing. If you look inside, you will see that the banana post connects to the circuit board via a two piece plated brass metal strip which are bolted together to complete the circuit. THe SpeakOn is a single continuous silver plated conductor per pin into the circuit board.
My Stillpoint definitely was not a good match for the Crown, too 'hot', had better lock with BDR cones, bamboo footers, and soft type footers.
I also had slightly better sounds with a little conditioning.
I won an XTi1002 which I thought was more to my sonic tastes, it had a more 'juicy' midrange and fuller mid-bass. With the XLS showing superior 'air'.
I use the XTi for bass duties mostly since I Biamp.
CAT SL1.>1. Marchand crossover @250Hz >RA 3205Sig.(modified Jolida 502B)> mid/hi panels, 2. Crown XTi1002 >VMPS RM1(modified) twin 8" bass drivers.
THe best sound (for me) was using the XLR inputs (I used a custom RCA-XLR IC) and the SpeakOn connectors. And topped off with soft 'squissy' footers.
The stock RCA in and banana-speaker post exhibited that harshness you are hearing. If you look inside, you will see that the banana post connects to the circuit board via a two piece plated brass metal strip which are bolted together to complete the circuit. THe SpeakOn is a single continuous silver plated conductor per pin into the circuit board.
My Stillpoint definitely was not a good match for the Crown, too 'hot', had better lock with BDR cones, bamboo footers, and soft type footers.
I also had slightly better sounds with a little conditioning.
I won an XTi1002 which I thought was more to my sonic tastes, it had a more 'juicy' midrange and fuller mid-bass. With the XLS showing superior 'air'.
I use the XTi for bass duties mostly since I Biamp.
CAT SL1.>1. Marchand crossover @250Hz >RA 3205Sig.(modified Jolida 502B)> mid/hi panels, 2. Crown XTi1002 >VMPS RM1(modified) twin 8" bass drivers.