How to Bypass electrolytic caps

"i am exploring using some film caps to bypass these to cope with the inherent dryness of the amp."

You can't. Its dry. At best you will,extend and clean the highs a bit. "life" is not in the highs.

Sell this terrble creature. My ears were bleading every time I heard "it"

Buy normal amp, buy good amp. Buy Nelson Pass if you like solid state, buy Joule-Electra - tube OTL amps (well, its depend if your speaker's impedance dip low, of course).

Buy cheaper Parasound JC-1 or new Bel Canto Ref1000 Mk2 for solid state (something new and excellent!!!!) and... Mcintosh 275 for tube or BAT or ... something

Entire world is open for you. You cannot do anything with, and I quote "inherent dryness". I been on live concerts, once or twice in my long life - no dryness there. NONE!

Good Luck

I have no knowledge of what Spectral has been doing in recent years, but I recall back in the 1980's that their designs tended to be of the "dc to light" school, meaning ultra-wide bandwidth. If your amp is like that, it would mean that it would let through any ultra-sonic garbage that may be present at its inputs, that most other amps would filter out. That in turn could conceivably intermodulate with lower frequencies, producing audible results.

So if you happen to be considering a preamp upgrade at some point, you might want to select one with relatively limited bandwidth, perhaps a tube design.

Just a thought.

Regards,
-- Al

The type of cap you select to bypass is also key. Poster Spectron made the comment that the bypasses cleaned the highs, but did not help with the dryness. He is correct, the life of the music is in lower frequencies. If you bypass with very small value caps, you will end up with that very detailed upper end, but in long term listening, becomes boring or worse, fatiguing. Stay away from the teflon and polyprop caps of small values. You need a larger value. I'd suggest you visit the mouser web site and order an assortment of film and foil caps of a high enough voltage rating (check the voltage on the filter caps) and do some experimenting. You'll find the voice of the amp or pre amp changes drastically as these bypass cap values are changed.

The larger values will help the midrange. Using a bunch of small value caps to clean up the upper frequencies can easily be over done.

good luck.