Need help re Quad 909 Binding Posts

I don't own the Quad 909 and I'm not familiar with the binding posts they use. However, I have owned other modern amps from British companies that used some odd binding posts (by US standards). I believe they may be posts that comply with the BFA standard. If this is the case, you may have plastic buttons installed in the ends (as stated by Geared4me). You may be able to pry these buttons/plugs out of the ends and use bananas. Also, if they are BFA type post, the may actually have a pin in the center that prevents using standard bananas. If that is the case, the BFA type of banana plugs, like the Nordost Z-plugs or similar BFA compliant models, work great.

I used a pair of cables using Nordost Z-plugs on my Arcam Alpha 10 with outstanding results. The BFA banana plugs make an excellent mechanical connection with these types of binding posts.

Enjoy,

TIC

I found a picture of the back of the 909 and it does look as if all you have to do is get the plugs out of the center of the binding posts, as Geared4me suggested. I've at time had to resort to drilling a very small hole into the center of the plug to give a place to get a small screwdriver tip into the plug and work it out.

If you accomplish that, the BFA-style banana plugs that Reubent suggests are the way to go. A good option in addition to the Nordost Z-plugs are the Audioquest plugs.

I too own the 909, and had the same frustration. I went a much cheaper (and lazier) way: the side hole made for bare wire fits one of the prongs of my spade cables. The other prong stradles the side mount, away from the other output post for the respective channel. In fact, the geometry of the back of the amp also serves to hold it snug in place. I covered the other ("free") prong with some insulating caps, and it seems to work OK. Not ideal, I know, but a whole lot easier than changing the binding posts. You will leave a mark on the spade prong that goes in from the fastener, but if that's OK for you it may at least be a temporary solution.
Of course, if I set my house on fire doing this I will give you an update...

Though they are not intended for the purpose , this item from Parts express works great using bananas .

Dayton SPCO-GRB Compression Spade Pair
(5 reviews) Email A Friend See Catalog Page



List Price: $6.99 PR
Your Price: $4.70 PR (1-9)
$4.48 PR (10 + )

Sku 091-315: In Stock

http://www.parts-express.com//pe/showdetl.cfm?&DID=7&Partnumber=091-315