Tubelike SS Power amp


Looking to mate tube pre with SS power amp based on input off this board. Want to get warm sound and need high current for relatively inefficient Ohm Walsh 2 speakers...100 wrms@8ohm target power. Suggestions?
joekapahulu
6 moons just did a review of a Wyred 4 Sound amp that might be worth a look.
I've used TAD Hibachi SS monos with Ohm 100s and found that they mate nicely. There is a touch of extra warmth from the TADs that flatters my Ohms, which -IMHO- can be the SLIGHTEST bit lean sounding (ala Quads). When I added subs to the equation, that tiny tonal tic was eliminated and a warm amp became less appropriate.

I now mostly use my ARC VT130SE in this set-up. This isn't the "tubiest" sounding tube amp out there, by any means. I still prefer the ARC, but - to the extent that you prize the imaging characteristcs of tubes - you should be aware that this difference is not dramatic on the Ohms. That "3D" tube image quality is IMHO less evident with the omni-directional Ohms than with most monopolar speakers. The Ohms' imaging has been similar (GREAT!) with all amps I've mated to it.

Marty
Monarchy mono amps.SOME OF THE BEST SOUND FOR THE BUCK.My se 100s are 100 at 8 ohms,200 at 4 ohms.driving a vintage pair of Magnepan mg-3.power to spare.Will drive 2 ohm loads with fan forced cooling.
I'm currently using an Audio Horizons tube line stage.I moved from ss amps to tube power in 2003,and since then have owned several tube amps.Personally I believe it's a natural progression in pursuit of excellence,like 90 point wine.Every once in a while I slip back into the ss camp,and lately Class D(I had a weak moment)simply because I wanted to see if I'm missing anything.Not at all.