Audio Research LS-7 LS7 upgrades suggestions

I don't want to spend more than about $300 - $500 for the upgrades. Because the LS7 is a "budget" component in the ARC product lines, I thought that perhaps I can replace some of the "budget" parts and improve the sound. But I don't want to go crazy and spend 10X more than what I paid for the LS7 (I bought the LS7 for $300). My skillset is limit to soldering only, so beyond that, I will probably won't attempt.

Newbee, the LS7 is still being shipped to me, so I don't know how it sounds yet.

Thanks for all the suggestions b/c I am sure other LS7 owners might want to do the same upgrades.

For 300 to 400 you can jam some nice caps in the critical spots and do some diodes, with fuse, new power cable, very easily… Probably can do it well under 200 if you are able to do it pretty easily yourself for sure, somebody might mod it for you with shipping for around 300 as well. I can tell you I had a LS7 I believe which was the tube based hybrid? And I had a LS3. The 7 was nice, I remember it being a little dry, maybe a bit thin depending on the amp and speaker match you run…

Definitely you could get better midrange bloom and BAss down low with some higher grade caps, I suggest the new Clarity ESA range which are very dynamic and warm, far better prices and sound over the big mundorfs etc…Clarity MR range could be even better, but very expensive, and get much larger in size. If you can make them fit, but remember they become far larger when you go to exotic caps over most manufacture stock sizes at an equal value. Jantzen Superior caps are great as well for very little money, better than the Relcaps, MIT, cardas, mundorf ranges for sure at the price levels.

That unit should have a ton of room in the AR chassis and I think its capacitor configuration is pretty simple and not many of them. If you want the most bang for the buck and can do it with a little good soldering that’s where I would start for the most effective mod, all the rest will fall behind for fun.         

Just for the general info pool: The four rectifier diodes are right next to the transformer and would take all of 20 minutes(if one were really challenged as far as dexterity) to change out, at a cost of less than $16.00(if IXYS soft recovery FREDs were used). An upgraded power cable should be considered a "must", regardless of what preamp is discussed(figure around $200.00), unless the unit comes with one. YES- The coupling caps(especially) will make a dramatic difference in sound, but finding the ones that suit one's tastes can be harder(and less predictable in the unit/system) than rolling NOS tubes. There again NOS tubes should be considered a "must"(if maximum musical enjoyment is the goal), regardless of the gear discussed. AND the ones you don't like can be sold at just slightly less than what you've paid(you'll know if they're keepers in the first 10hrs, which won't affect their measurements in the least). IOW: Most of what he would spend on his LS-7, would be spent on any other tubed unit he might purchase, in the effort to obtain enhanced music reproduction.