Amp stands for Pass Labs

Don't let anyone fool you, isolating your amplifiers can make a great sonic difference. I've used three different amp stands with varying results. I'd rank them in this order: 1. Sound Anchors custom amp stands
2. Solid Steel Large amp stands 3. Auralex Gramma speaker and amp stands.

I know all 3 stands can enhance the sound over just sitting them on the floor. I don't know the reason others cannot hear the difference. The bottom line, try a pair, Music Direct will sell you a pair to try for up to 30 days. If you don't hear a differnce, send them back.

Have fun!

Huh,

I said no such thing either by description or by your suggestion have I ever done such a thing. I never accomplished any such feet/feat so completely except for that first time with the Essence amp because it was designed so completly to do so from the factory. The reason that I brought up the Essence was to describe the experience of separately coupling the power supply to ground from the main chassis and "that factory design" would be superior to the following. All other mods I performed were to couple the transformers of any other audio device directly to their own chassis,not independently. And those uspeakable mods could be performed by any thoughtful designer to everyones benefit, including to the Pass by Mr.Pass. You do not have to screw thru the chassis to do so, you simply put unthreaded points and coupling discs between the transformer and the existing chassis and replace the factory supplied steel screws that screw with the field of flux with non ferrous materials as described in published text books from a few hundred years ago. All other factory built power supply mounting methods I have seen are inferior to the method applied by Mr.Pitcher and Mr.Riehl just over ten years ago. Tom

You have no sense of adventure Tvad.

What you need to do is audiotweak the system i.e. bolt a high rise aluminum Edlebrock manifold (using points of course) to the amps.

Then add a pair of Holley 4 barrel carburetors (make sure you remove the transformer bolts and mount directly to the manifold-points are optional here) to really boost the torque and horsepower.

Now you're cooking and applying the well know science and research of the past 150 years.

She's real fine my 409....................