Buy tubes from Audio Research or not

Yes. it's possible a resistor or resistors may have changed value. Usually when a tube arcs it takes out a resistor. If you feel the need, you might have a qualified technician make sure the resistors around the failed output tube still measure the proper resistance and that you have correct voltages at the tube socket. G

Hifigeek, just an FYI re your last post. I called ARC and spoke with a tech there. He did NOT disagree with the advice in your last post. However, he did comment that if the output tube and its "slave" (i.e., VS 115) biases within spec, and the amp otherwises operates well and sounds ok, then he thought everything was "probably" ok. I surmise from his comment that the risk of damage and grief from packing and shipping the amp (62 lbs) was greater than the benefit of changing out the resisters, especially if the amp biases ok. OTOH, there is an ARC authorized repair guy near me who I have used before. I once blew a tube on my old VS 110 and it took a resister with it. For a couple of extra bucks, the tech replaced the resister on the spot. But let me tell you, the VS 110 was a pain the butt to schlepp around, even in the back of my car.

BTW, I recently bought a vintage Crown DC300A (approx 45 lbs) off eBay for my son. Based on the pics, the amp was in mint condition. However, when I opened the box and examined the amp, it looked like the carrier played catch with the box and dropped it. The amp suffered minor cosmetic damage. Fortunately, it was going back to the factory anyway for a check-up and the damage was easily fixed. Those old Crowns were bomb proof! Anyway, I will think twice about moving my equipment around unless I really need to.

I had to repair a VS110 a few weeks ago. There not that bad to move if you have a friend handy. BTW I talk to ARC at least once a week and I tend to be a bit cautious with tube arcs etc. That being said, I understand you not wanting to shlepp your amp. I do make service calls for my customers when the need arises. Regarding the Crown DC300A, they are bomb proof.