2. amps-preamps
  3. 1267984978

Power output of tube amps compared to solid states

I'm having a hard time trying to figure out how tube amp power output relates to solid state power output. I've been looking at the classifieds for tube amps and I see lots of tube amps with 50w or 60w output, but nothing close to the 250w output typical of solid state amps.

So I have no idea what type of tube amp is required for my set up, right now I'm using totem forests with a required power rating of 150w-200w at 8ohms. The bass is so powerful on these that I have the sub crossover set to 40hz.

My question is, are tube amps so efficient that 50w from a tube sounds like 150w from a solid state? Or will 50w output from a tube severely limit how loud I can play my speakers? If so, are tubes usually meant to be driving super-high efficiency speakers?

I had previously tried a tube pre-amp with a solid state power amp (both musical fidelity) and didn't like the results because the imaging suffered greatly, even though the music sounded nicer from a distance. Now I want to try a solid state pre-amp (bryston) with a tube power amp (no idea which brand to look at), but I don't know how much power output I need or if it will even be possible with my speakers. Does anyone know what I would require?
acrossley
unsound
7,329 posts
 
Atmasphere, that might be true, but then there is the issue of whether or not ss or tubes offers such a distortion in the first place, whether or not it does, does it do it often enough or at enough volume to be noticed, whether or not the effect is masked, enhanced or not effected by what proceeds it, follows it or accompanies it, and what by what ratios? Is it lost in the mass of other distortions?
If ss is more prone to such distortions, wouldn't ss sound louder at lower volumes? Isn't that exactly the opposite of what some here are claiming, that tubes sound louder despite lower power outputs? How could the speaker and amp be of no consequence? With all due respect there are way too many things to consider before taking such an excerpt at face value.
atmasphere's avatar
atmasphere
11,807 posts
 
Unsound, sounds like right here is the point where you are going to have to try this out yourself rather than relying on other's input. I've only been offering the 'why' behind the experience.
rugyboogie
199 posts
 
This is strictly my opinion/impressions

Having owned some SS amps SUMO, PS Audio, Hafler, ML33, ML 33h, ASR Emitter II over the past 20 years I have made a switch to tubes. Have settled for a 211 SET and am really enjoying it. Its 18 watts of pure bliss.
Friend brought over his VIVA mono's as well as his MACTONE.
The Viva's were great and the Mactone was nice at lower volumes.
Do most of my listening around 75 to 85 db, above 95 getting a little loud for me
For me the music that comes through the tubes is much more involving. In my case anyways.
Was really curious on having a SS power house amp in with my 18 watter.
Reading HP's review, decided to try a pair of 1000 watt Brystons mono blocks.
Had them on loan for a week and they disappointed me to say the least.
This is not to say that a SS may not reside in my home but for now I am converted.

YMMV.
unsound
7,329 posts
 
Atmasphere, the "why" for me is; never mind the isolated tests, why haven't I come to prefer tubes in real systems? Please forgive me for answering my own question, I suspect it might have more to do with the speakers that I seem to prefer. Whatever charms tubes have (oh yeah, I can appreciate some of them) might be outweighed by the compromises that the speakers that they need to be paired with have. In the end we listen to systems, not components, and especially not isolated tests. Of course that is not to suggest that isolated tests don't have merit, in proper context they absolutely do.
pubul57
3,712 posts
 
Unsound, I think you hit on it, some speakers simply need SS to be driven properly ans tube amps will not perform well with them - usually amps with low nominal input impedance, but perhaps more importantly speakers with big swings in impedance at various frequencies - I think Theil speakers might be like that. Like the question of passive versus active preamplification, the system context makes all the difference, and not necessarily the inherent attribute of the amp, preamp, or anything else.
More to discover