Power Cable options for Levinson 300 series

Do you have dedicated circuits?

I agree, with Samzx12. Before spending mega bucks on power conditioners or even powercords, get a dedicated line installed. It's relatively inexpensive. I paid like $300 for two 20amp dedicated lines about 8 years ago. One for the front end and one for the amps.

I've just started my house remodel project, and will be adding a dedicated listening room with more dedicated lines, one for the digital front end, one for the analog front end, one for the amplification, and one for the HT gear. Luckily the electrician had done something similar for some rich client before, so he doesn't think that I am crazy.

FrankC

Seriously, a few years back, the local (now defunct) store was demoing a pair of the reference Krell monoblocks like 1000w each driving a pair of the Dynaudio Evidence speakers. In the middle of the demonstration, the breaker tripped and the entire store went dark. Supposedly the store had these 30amp lines. But I guess the Krell was drawing a lot of current during some passages. It required 20 minutes before they could turn on the power again. But within few seconds of their second try, the store went dark again. I didn't want to wait another twenty minutes so I left. Imagine someone using zipcords behind those Krells. I wonder what would happen....

FrankC

I still own a 335 and it has the removable power cord that was replaced even before I plugged it into the wall the first time with a BMI Whale elite. Huge difference in soundstaging and low end reproduction. The even bigger difference sonically in my system was the addition of adding a 20 amp dedicated line for the amps. It opened up the dynamics and reduced the noise in the system even more. I would suggest trying that first?