2. amps-preamps
  3. 1280964265

Quicksilver V4 or Silver 88 advice needed.....

I've compared an older first generation Quicksilver V4 (green LED power switch) and a Quicksilver Silver 70 (blue Led) and am looking to get the best of both worlds....

1. Love the drive and bottom end on the older V4...the drive is simply amazing with my Vandersteen 2ce Sig II speakers.

2. Love the midrange on the Silver 70. It's liquid 3-D.

What combines these two?

....the newer Quicksilver V4 (blue led with newer transformer) or the Silver 88?

Any advice appreciated from the experts out there! Thank you in advance.

Best
Theron
Baltimore
128x128theron_day
theron_day's avatar
theron_day OP
20 posts
 
I meant to say 2.0 for the long run. :)

Theron
pubul57
3,712 posts
 
Not having heard the Silver 88, but just read the description on his site, it would seem that if the 88s do have the lowest about impedance (higest damping)that the 88s should give you controlled bass (for a tube amp)with a lot of purity that comes from the simpler output stage. There is something to fewer tubes making for better sound IF you can get enough power, and I think 80 watts of tube power is plenty of power for your application, I doubt you could hear any meaningful difference between 80 and 120 watts.
theron_day's avatar
theron_day OP
20 posts
 
Yes the 88 is probably powerful enough since I dont play at incredible loud levels. I live in a loft style apartment (neighbors above and below). The space is fairly large 25' high ceilings. The Vandies breath well in the room with proper placement.

Theron
yogiboy's avatar
yogiboy
5,716 posts
 
I own the Silver 70's and use them with EL34's. Just a word of caution, you can only use kt88 tubes with the 88 but you can use different type tubes with the V4 and the 70.
theron_day's avatar
theron_day OP
20 posts
 
I have Gold Lion KT88 reissues and really like them in the 2 QS amps mentioned.

BTW I think you can also use the KT90 in the Silver 88 if I am not mistaken...
More to discover