Help power pair of Infinity Kappa 9's please

I'm quite happy running my K9's with a pair of Threshold SA/2 monos. 100w/ch but plenty of current. I have run the speakers with a pair of Threshold S/500 II's in bi-amp mode as well and honestly the SA/2s sound way better.

I have to add that Mitch is right here.

if you do not biamply and put a Threshold S/1000 or SA/2 in front of them and use a good tube amp Audio Research SP11 or solid state Threshold FET 10e or 11 or SP15 this loudspeaker is going to blow you away!

They are real life keepers if you do not have the room for the RS-1, Gamma's or Betas.

Believe it, I bi-amped Kappa 9s with a pair of Sony TA-N80ES amplifiers together with a Sony TA-E80ES pre-amp for the last twenty years without any problem. I was in love with the Kappa 9s and decided to buy them even though the salesperson at the local high end electronics store has warned me they will destroy my Sony amps in few minutes. At first I was very careful with the volume level, then after playing the first album I cranked up the volume level and went through couple more albums without any problem, I was happy enough to call the salesperson and let him know my Sony amps could drive the Kappa 9s and also invited him over to my house and with my permission he cranked up volume to the highest level our ears could handle and by the look at his face, I knew he was shocked to see my Sony amps could happily run the Kappa 9s. Anyway, I highly recommend any Kappa 9s owners out there to look for a pair of Sony TA-N80ES amps on Ebay or Craiglist, and depend on condition might cost between $400 to $600 each.

Here's my email address if you have any questions about Sony amps: 7matchpoint@gmail.com

Specifications:

1. General
System: analog
Color: 1=Silver, 2=Black: 2 (Wood Sides)
Power consumption: 510 W @ 120/240 V

Power Amplifier
Speaker Outputs: 2 x 2 Speakers; Phones
Continuous Power 4Ω: 270 +270 (THD 0.006%)
230 + 230 (6Ω, THD 0.005%) Watts
Continuous power 8Ω: 200 + 200 (THD 0.004%)
1 x 610 (Mono) Watts
Frequency Response: 1-200,000 HZ
Input Sensitivity: 1,000 (balanced)
500 (balanced) mV
Input Impedance: 30 (unbalanced)
0.6 (balanced) kΩ
Harmonic Distortion: 0.004 (4Ω)
0.003 (6Ω)
0.0018 (8Ω) % at rated output

2. Physical
Dimensions in Inches: 18.50 x 7.28 x 17.32 (w) x (h) x (d)
Dimensions in mm: 470 x 185 x 440 (w) x (h) x (d)
Weight in lbs: 52.91 lbs
Weight in Kg: 24 Kg

Hello

I can offer you Dayton Wright Sps-Mk3 professional preamplifier for your equipment with tube sound,if you didn't buy the electronics allready...

Thank you for your precious time and plausible answer

BR,
Jason

hi friend
i hope you could help me as you have also Kappa9 !
i need x02 3" Edgewound Voice Coil Polydome Midrange Driver !
i can not find any where to buy it . could you please be so kind and name me any company which can help me ? my email is also : info@audioartReference !
thanks very much for your help !

regards
soheil