cayinA100 T tube amp


i recently purchased this amp and became interested in the fact that there is the ability to add a preamp, bypassing the factory amp......i was pursuaded to buy a solid state preamp with assurances that this combination would significantly inhance the sound.......turns out this was a very bad mistake,and the combination was much worse than just using the cayin alone.....still, the idea of adding perhaps a high end tube preamp still intrigues me and and i wonder if anyone has any sugestions on any products that would "significantly" upgrade the cayin as a stand alone integrated amp......thanks
128x128rrfrerichs1950
From what I have read in reviews, the amp in the 88T and 100T are very very good. I recommend what Detredwings said and roll some tubes 1st. If you still are not satisfied then go with a preamp.
It is easy to change the amp's tone by making changes in the power tubes and the small tubes if what you want is a different tone. I did. You can start with different KT88's or 6550's. But you've got to have a goal in mind.

You can increase clarity some by using a high quality preamp but I wouldn't spend my money on a new preamp just to get a different tone.
I have an A100 and drive it with a preamp connection. The preamp I use is the VAS Citation I, made by Cayin's parent. I also use the VAS Citation to drive VAS mono blocks, in a three channel configuration. Very happy with the 'Cayin' sound. I do notice a significant difference when I use the preamp to drive the A100, even beyond the Phono inputs which was the main reason I acquired the Citation. When I drive the amp with cd input, there is less of a difference, but still noticeable. Tubes make all the difference. I have not done any tube rolling, yet. I also have a Cayin T88, which is not in use. I moved up to the 100 for more power and it made a significant difference. I drive different sets of ProAC speakers.
Are you unhappy with the performance or your Cayin or just looking to get the most out of it you can?

I have a Cayin A-300P which appears to have the same configuration. There is no active preamplifier stage, only a volume pot and input selector with the power amp stage. So it is not a true "integrated" amp.

If you read much about "passive preamps" (what an unfortunate term!) you will learn that many hobbyists prefer them, while others are satisfied only with an "active" preamp. Advantages can be listed for each design. I think it boils down to system compatibility and personal taste. See if you can borrow a couple of different tube-based active preamps from dealers or friends and decide for yourself.
swap out the preamp tubes for some NOS makes a big difference you wont even have to think about a separate preamp.. thats what i did and it made a big difference in the sound
More to discover