2. amps-preamps
  3. 1293939574

Setting up monoblocks

Hi, any help would be great. I am sure this is simple but I can't get my head around this.
I was given 2 denon-poa-6600 monoblock amps. They each have 2 outputs.
Running them into my preamp and 4 speakers. Looking at the front speakers do I use one amp for front left and rear left, and then right front and rear with the other amp?
The mono part is playing with my mind not usually this mentally challenged hahah.
Thanks
eagleflyerfan
rwwear
2,867 posts
 
First of all, the amps have inputs from the preamp. The outputs go to the speakers, one for the left and one for the right. Each amp will only power one speaker unless they have an A/B switch and then only one channel.
tom6897's avatar
tom6897
1,484 posts
 
If you are referring to the speaker binding posts and there are four speaker outputs, I believe they are for Bi-amping your main L and R speaker if so appointed. Not front and rear.
mceljo
1,357 posts
 
If it's a monoblock and not a stereo amp then your setup should be the following:

Preamp to left and right monoblocks to left and right speakers. You'll need additional amplifiers for rear channel speakers.
More to discover