ARC VT100 with KT-120 tubes ?


I have seen posts about the KT-120 as a replacement for the 6550. Have any VT100 (Mk II) owners re-tubed their amps with the KT-120? What differences did you notice ? What bias setting do you use ? Is it an "improvement" ?
mabonn
Bifwynne, I will be getting in a VS-115 with KT-120's for service. I will let you know what the power output is once the unit has been gone through.
I talked to ARC today 3/9/11, sorry I forgot the name, but ARC is now strongly recomending that even current products like my Ref 210s be sent back for some power supply adjustments before going with the K120 tubes. He said they have learned more about the K120.

BTW I did not go into any detail since I was calling about another 6550 tube issue and I have 650 hours on my set so I will not be making the jump soon. My issue is a 6550 driver tube that will not hold bias.

I am looking forward to the K120 for hopefully both sonic improvements and reliability improvements over the SED 6550 - but its not like they dont sound good IMO.
Terry
Both the Ref210 and Ref610 require changes to one of the regulated power supplies in those two amps. I will probably be able to update the Ref210 at my office, the Ref610 on the other hand requires a more extensive update and therefore Ref610's will need to go back to the factory.
Thanks Tdaudio for the power supply info. That's good to know.

Hifigeek, do you know anything about the power supply adjustments that Tdaudio mentioned in the post above? Also, just curious about the VS115 you have for repair. What's the problem? I'm interested because I own a VS115.
Tdaudio and Hifigeek: spoke with Chris at ARC today. Was told that REF210 and REF610 will require mods, as mentioned by Hifigeek above. However, the VS115 and many others are ok as is. Until something comes out in writing, I would still call to double check for yourselves.

Chris also said that ARC is not in a position to say that the KT120 will have extended life over the 6550C because there is not enough history behind the new tube and a lot of variables are in play that can affect tube life. However, ARC does believe that the new KT120 sounds better than the 6550C.

In my case, as I get closer to the 2000 hour mark for my current set of 6550C tubes, I will probably consider dropping in the KT120s. I'm very curious to hear how they sound. FWIW.