Anybody tried KT120 tubes on Conrad Johnson amps?


I use a pair of Conrad Johnson Premier 8A mono blocks. I was using Svetlana 6550 tubes on it, I switched to Tungsol 6550. Then Tungsol announced KT120s. Tungsol says it is suitable for 6550 users, but CJ says use only 6550s. Did anybody have an idea?
john_kns
I also want to upgrade my amplifers. I want to upgrade the capacitors, resistors and wiring. CJ announced they have capacitor upgrade C1 for old amplifiers. They ask 2000 Dollars for each amp. I think I will go for Mundorf caps. I used to have Unison Research S8 amp, I modified it with Mundorf caps, Japanese tantalum resistors, good wires and DACT attenuator. All this mods took the amp to another level. But it took about 300 hours for breaking-in, wich drowe me crazy.
HI Guy's
I totally agree. A cap upgrade is pretty safe and I believe I indicated that. I just wanted to not discourage folks from certain kinds of upgrades that are safe and can really add to the sonic experience. Tubes are a different story and should be done very carefully.

My guess is I will never upgrade to the KT120. The differences with just the heater current, while not great for a single tube, adds up when you consider that I have 16 6550's not counteng the regulators. The resulting added current may well overload the heater supply. I'm very curious about others experiences.

Sparky
Karma if you want to upgrade your amp replace all the electrolytic caps in the amp if you haven't already. That will make a huge difference especially if that amp has the old style twist lock lytics on the high voltage side. ARC's upgraded caps have an adapter on them. They are not twist locks but with the adapter plate they provide it's a drop in replacement. Twist locks have high ESR. When I upgrade an ARC amp I always replace them. Also I don't have a circuit diagram in front of me but if you own the MKII servo and your so inclined I would find a better ic for the servo. Put in an IC socket so you can easily remove them. Servos IC's do have a sonic impact. Servos were a good idea at the time, but they're not really used all that much anymore.
HI Hifigeek,
Why in the world would I follow your advice? In a previous thread you made claims that I questioned. I asked you to back up your claims by telling us what your test methods were. This is a fair question. You refused to do so. Scientifically, your attitude is simply not acceptable and inspires suspicion.

As far as I'm concerned you are full of hot air and are just trying to impress the naive. But you can't fool me. With me you have zero credibility. I have all the test equipment and knowledge to stand on my own. Your input is not trusted or wanted.

Sparky