Preamp Deal of the Century

Rodger, thank you for listing your system. That was very forth right and I appreciate the sincere effort.

I think we are coming from different places. I am an all NOS tube, hard wired, SE triode, analog kinda guy. To me, Bryston SS through Nordost to metal dome Monitor spkrs couldn't be more of a bright combination. I'm not saying that any of these were "bad" choices, just ones that are place-specific "correct" IMHO; as in, what appears correct when you are at a certain place. With that said, I have recommended Bryston to people in certain situations, particularly when they want something to last forever, would like the 20 yr warranty idea for that reason, prefer dynamic headroom and detail as priorities and would never go tubes no matter how long they hung around the high end.

My intuition, if you don't mind me offering it, as a measure of your cognitive agility relative to your curiousity, is that you may want to move beyond where you are right now, its approach, at some point.

Cash is always a consideration, I know, at least it is for me, but others here may be able to give you some ideas to start off with. Or at least, give you some ideas on what you might try in the future.

I have the Sauvignon, the line-stage version of the Cortese. The Cabernet is the linestage version of the Grange. According to Mick the only tube complement difference between the two linestages is the 101D. There are at least 2 subs, the WE101D and WE101F. The WE101FA, WE216A might also work. These tubes are somewhat scarce but the good thing about them is that the WE datasheets state an average life of 40,000 hours. So one pair of NOS WE101D tubes could last over 4 years of 24/7 operation or the whole life of a preamp if you only leave it on a few hours a day.

Thanks Asa for your helpful and appreciated input. I was thinking that I my system was going to be on the brighter sound side and it will give me some reference of higher detail. I also wanted to experiment with the Subwoofer in the component mix. The Monitor Audio 3i speakers which I consider temporary for about 1 month or so will provide a medium of sound out only. My investment in the other components was significant for me and are all I want to invest (right now) into a total SS system. I did play the BP20 preamp through a Dennon POA 2400 SS Amp and I liked the clean blackness of the background. I think I would like to try a tube preamp with the Bryston 4B SST Amp at some near future point. I seriously considered tube equipment and I like good quality. $4K to $5K seems to be starting purchase point for good quality entry level tube equipment (for new preamp and amp)and I'm concerned I would want to upgrade (the tube Amp primarily) very shortly after. I prefer simple designs and few tube stages, the more tubes, more possible noise, complexity, troubleshooting and maintenance. Cary Audio would be my first choice to try for tube equipment. They are in Apex, NC and are about 12 ro 15 miles from me. I purchased the Bryston Preamps used so I could experiment and could, resell them if I pursued a tube preamp (which is strongly pulling at me). Because of brightness to be expected in my system I do not want to invest in good Monitor speakers until I learn and listen more. I understand that the tube based systems generally have a warmer, richer, and yet some detailed musical quality (lacking in powerful bass?). The balance of these characteristics I have not experienced for many years. I knew a person up in Toronto Canada that had a pair of Klipsch Corner Horns and 2-100 Watt Mono Amps (back in the 1983-84 time frame). The sound of that system was unbelievable and that was my tube reference. I distinctly remember clean and powerful. Pink Floyd Dark Side of the Moon never ever sounded so good to me as it did on that system :) Simple higher quality tube designs are more of interest to me. Regarding SS equipment, I looked at Krell and others new and used (new was out of the question for me to experiment with, and used prices were better of course however still high for used). I am cautious and aprehensive about older pure Class A or AB amp designs from a reliablity standpoint. The high heat dissipation, aging filter Capacitors and other components. My approach to the system I'm currently building is that it would be better to add desired levels of warmth ( combinations of tube preamp, cables and speakers) to taste to a brighter base system than to brighten up a very warm system. Then again, my friends...I have no good reference...yet. I look forward to sharing my experience in the future. Trial and error is a personal endeavor I suppose. Many of you probably relate to where I am at right now and already know better choices and can see possible mistakes ahead. All said and done, I'm having an adventure of learning and gaining more experience and I do really just want to listen and enjoy the music.

Any and all input is very welcomed.

Thank you,

Rodger

Rodger I would first recommend, as a point of reference, for ever more that you mechanically ground all your components... Do not mix and match different coupling devices they all have different ground potentials..And do not intermingle so-called isolation devices with coupling devices. You do that and you will have no reference at all. For a few hundred dollars you can direct couple all these pieces and they will be in step with each other as much as they will ever be. Intrinsic noise internally self generated as well as airborne micro-vibrations can be drained away quickly to ground. Resulting in a total system gain of 1.5 decibels netted by using Audiopoints thruout your system. Do not forget the speakers...Some of the brightness is distortion, and left in place in your components, will only be re-amplified and regurgitated over and over again.The reduction in noise and distortion will net you better and more tuneful bass, increases in soundstage and image focus, with greater overall system resolution. I am convinced these devices will allow you to truly hear and evalulate correctly what you do have, either right or wrong in your system. They will speed you on your journey to learn faster, and to store sonic memories and experiences, so you can become an honest to yourself educated listener of musical reproduction equipment. Tom

Tom, excellent point made on the reference grounding the system components. Thank you most sincerely for the advice. I did not really consider the aspect of reference grounding all the components. It makes abolute sense. I guess I accepted mentally the components being chasis grounded through power cord grounds. However, higher frequency attenuations and comprimised reference grounds. I will pursue the Audiopoints. Do you sell such devices or do you have recommendations of where to go to acquire them?

Thank you very much Tom!

Rodger