Rogue amps-- try 5751 instead of 12ax7


I have an Atlas and just swapped out the pair of 12ax7s for 5751s and it's amazing to me the transformation. The Rogue (which I run with KT90s, biased up a bit) has been incredibly detailed for me, good bass, very transparent and I've loved it. Adding the 5751 (Raytheon windmill getters) has injected this really cool vintage-y tone and an incredible soundstage depth.... definitely at the expense of some punchyness in the bass but it's a very worthwhile trade off to me. I recommend giving it a try.
dhcod
The 5751 is a well-known sub for the 12AX7 that works in MOST circuits. My experience is that the 3 mica black plate versions are the best of the bunch. My favorites are the early RCAs and GEs that have silver clips (looks kind of like braces) on the ends of the plates. Highly recommended!
I have used both RCA and sylvania 5751's in my Rogue M-180 with Golden Lion KT-88 reissues for several years to good effect. The GL KT-88 are getting a little long in the tooth, i might have to try the Shuguang Black Treasures,
I am going to try kt 120s on my rogue m180s next, I have gold lion 12au7s and 12ax7s on the way from rogue , should have them in a couple of weeks, but I was interested in the kt77s, what do they sound like? has anyone compared kt77s vrs kt120s? thanks, Chris
Here's a copy of what I posted a little while back concerning my "tube swapping" for my Rogie Audio Cronus. Mark and Nick at Rogue have always been extremely helpful. My system makes beautiful music.......
---------------------------------------------------
04-03-11: Adam18

For me, my Cronus, being fed by my Rega P3-24/Exact 2/TTPSU and Rotel RCD-1072, through my Vandersteens, sounds better after I did the following : an RCA NOS 5814 to replace the center EH 12AU7 gain stage tube, a pair of GE NOS Five Star 5751 "goldpins" to replace the Sovtek 12AX7 input tubes, and a pair of GE NOS 12AU7A's to replace the EH 12AU7 driver tubes. I then replaced the original Svetlana EL-34's with a beautiful matched quad of Genelex Gold Lion KT-77's.

All this "tube rolling" was done after some pretty nice conversations with Mark and Nick at Rogue Audio, and I'm glad I followed their advice. They are a pleasure to work with.
-----------------------------------------------
So, Dhcod..... I'm glad you're enjoying your Atlas. Happy Listening !
I use GE triple mica black plate 5751's and made a big difference in my Tempest II. The Sovtek 12AX7's sounded fuzzy and the GE's sound much more focused and clear.