Most torroidal transformers have electrostatic screen. Besides, it is unlikely that DC will be present at the secondary. I would suspect that it is possible one of the rectifer is bad.
If you have a scope, you can look at the ripple voltage after the filter caps or at the regulator input to each channel. Most of the time it should be small (in order of millivolts). But if you measure around 100 mV or more, that could be the problem.
Just my thoughts.....
If you have a scope, you can look at the ripple voltage after the filter caps or at the regulator input to each channel. Most of the time it should be small (in order of millivolts). But if you measure around 100 mV or more, that could be the problem.
Just my thoughts.....