2. amps-preamps
  3. 1327641333

Is it save to convert XLR to RCA?

Dear Audio Gurus,

I have a Harman Kardon HD990 player, which has two outputs: RCA and XLR. I'd like to use them both. However, my amps and pre-amps all take RCA. I know of XLR-to-RCA cables. But the HD990 specs mention that RCS is a 2V output whereas XLR is 4V. Am I going to damage my amps and pre-amps by trying this?

Thanks,
Walfredo
walfredo
almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
That all continues to be pretty baffling. Does the buzz still occur if the preamp is connected to the amp but the preamp is not turned on, or is not plugged into the AC outlet?

-- Al
c1ferrari
464 posts
 

I'm empathetic, Grannyring...I'm chasing a buzz, the 60/120 Hz type, haha, as well. Elusive things, aren't they? ;-)

Regards,
Sam
p.s. Hi Al :-)
grannyring's avatar
grannyring
6,500 posts
 
Yes Sam. Chasing a buzz.

The preamp need only be in the system and not turned on. Just the ic's hooked up to it.

I ran a wire from the chassis of the pre to the chassis of the amp and still a buzz.
almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
The preamp need only be in the system and not turned on. Just the ic's hooked up to it.
What if the preamp is hooked up to the amp but not plugged into the AC outlet?

And what if the ic's are connected to the amp but left unconnected at the other end?

Sam -- good luck on your issue as well!

Best regards,
-- Al
grannyring's avatar
grannyring
6,500 posts
 
With the pre's ic's hooked up and the unit unplugged the buzz still lives.
More to discover