Gbart just built one of these DC blockers for me and I'm quite pleased with it. Transformer hum is gone, and there aren't any ill sonic side effects. There is still a little noise at the speakers if I stick my ear right up against them, but no one ever accused a Cary V12 of having "deep black backgrounds." On the whole, with this thing installed it's the quietest my system has ever been. Well done and very reasonably priced.
3 preamps with transformer hum, DC on the line?
Hi everyone,
Searched the first couple of pages around transformer hum but did not find any specific answer around this. I have had the 3 following preamps in my main system with transformer hum, most of them on a dedicated 20 amp line:
- NAD T163 A/V preamp
- Audio Refinement Pre-DSP 2
- Audio Refinement Pre5 (current preamp)
Like I said, all had transformer hum. The problem reproduces with all other main breakers off except the dedicated 20 amp line and the preamp plugged into that dedicated line. I called my power company today requesting that diagnostics on the line into my house be done (check for DC and possibly adjust the AC frequency)? This would be great if this fixed my issue. I have also tried a PS Audio Humbuster III which did remove most of the hum but also killed the high frequencies so I removed it. If the power line diagnostics all check out, would you:
- Try to have the Audio Refinement Pre5 transformer repaired at Audio Plus Services which is USA YBA distributor and service minimum of $250 plus shipping both ways from Seattle to NY. I also have a good local solid state repair shop and I plan on calling them today to see if they can repair this locally. Is repair just a short term band-aid on what could be a tired power supply?
- Try to find a high quality replacement for the Audio Refinement Pre5 transformer. I have no idea what this would cost or how I could find a high quality drop in transformer.
- Have an external high quality power supply made like one from Welborne Labs made.
What does everyone think? The last two options look to be the cheapest route with new parts and warranties vs repairing used parts.
TIA very much,
Scott
Searched the first couple of pages around transformer hum but did not find any specific answer around this. I have had the 3 following preamps in my main system with transformer hum, most of them on a dedicated 20 amp line:
- NAD T163 A/V preamp
- Audio Refinement Pre-DSP 2
- Audio Refinement Pre5 (current preamp)
Like I said, all had transformer hum. The problem reproduces with all other main breakers off except the dedicated 20 amp line and the preamp plugged into that dedicated line. I called my power company today requesting that diagnostics on the line into my house be done (check for DC and possibly adjust the AC frequency)? This would be great if this fixed my issue. I have also tried a PS Audio Humbuster III which did remove most of the hum but also killed the high frequencies so I removed it. If the power line diagnostics all check out, would you:
- Try to have the Audio Refinement Pre5 transformer repaired at Audio Plus Services which is USA YBA distributor and service minimum of $250 plus shipping both ways from Seattle to NY. I also have a good local solid state repair shop and I plan on calling them today to see if they can repair this locally. Is repair just a short term band-aid on what could be a tired power supply?
- Try to find a high quality replacement for the Audio Refinement Pre5 transformer. I have no idea what this would cost or how I could find a high quality drop in transformer.
- Have an external high quality power supply made like one from Welborne Labs made.
What does everyone think? The last two options look to be the cheapest route with new parts and warranties vs repairing used parts.
TIA very much,
Scott
- ...
- 34 posts total
- 34 posts total