Retubing an ARC VT100 mkll

BTW Never use a KT-120 for the regulator pass element in any ARC product. It's a definite no no.

Ok, so, just finished installing and biasing (adjusted to the same 130 mV the amp recommends)a matched octect of Tung-Sol KT120's. Less than an hour playing time skipping through a bunch of artists I am familiar with(now Keith Jarrett playing J.S. Bach) and the verdict is positive so far. Can't speak to whether it can play louder than the EH6550's but they sound very good-perhaps a touch more effortless and glassy than the Electro Harmonix tubes but that could be just fresher tubes, hard to say. Mind you, the 6550 were only put in last Fall, so they were probably just at their "half life" based on my listening habits. Will keep the group informed as they break in, but good news is nothing went bang and they are dead quiet as well.

So the verdict after decent breakin time- they're pretty good. Not what I would call a flat out night and day difference but a bit more "drive" and a little less glare in the upper ranges especially when the volume is turned up. All in all I'm pleased for the $450 spent, but I will give full props to the EH6550 tubes - they were a good value. Assuming I can get 2 years out of the KT120 set, I am happy with the change over. BTW, one big physical difference is the heft and weight of the 120 vs the 6550. These things feel like they're built to last. Cheers!

Just a footnote comment about the KT-120s. I had about 3000 hours on my KT-120s and thought it might be a good idea to retube my amp. I bought a complete set of tubes from Upscale Audio and dropped them in. The price is about half what ARC would charge. Kevin Deal burns in his tubes for 72 hours before matching and then checks three electronic attribtes: bias, G2 and transconductance. After about 20 hours of break-in, it's quite obvious that the amp sounds better. FWIW.

Btw, one of the matched sets did not take a bias adjustment. I put an old tube back in and everything was ok. Called Kevin. He immediately shipped out a replacement matched tube. Everything is now good to go!!

Wow 3000 hrs. is well passed the recommended ARC replacement time. I would say you got lucky..